citroen jumpy immo off 0281010816 EDC15C2 3plug

[gejzaslapka]

hello, can someone make working immo off on this ecu? key is lost and trying to code new key with code from card without success

Citroen Jumpy RHX EDC15C2 3 plug connector both ori files included

thanks to all

GS

[vladanr]

444325 here you are

[gejzaslapka]

hello, tested, but not working, ecu still locked, immobox disconnected

[vladanr]

444512 try this eprom

[morgano]

hello, tested, but not working, ecu still locked, immobox disconnected

Never heard you need to disconnect immobox for this PSA ECU.

[gejzaslapka]

BIG Thanks to VLADANR. Car is working.

GS

[cantontech]

Its works for xsara with the same HW ?

[Pavlenko]

Hello collegues,
I have the same problem with immo off for the same car.
Citroen Jumpy 2002 2.0 Hdi RHX Ecu EDC15C2 3Plugs
Eeprom 5P080, Flash 29F400BT
I have tried different solutions and dumps - no success.
The ECU has Lock status in a diagnostic.
Perhaps, Vladanr, you can help with this. 844959

[vladanr]

844966 try this

[Pavlenko]

Thanks for the file Vladanr!
I have written it to 5P08C3 but didn't try to install the ECU in the car yet.
On a table connection to a diagnostic software the ECU still stay in Lock mode.
Before I install it in the car, please, help me to understand what should I do with Immo modul connection? Have I keep it connected or disconected?
Probably I need to disconect it partially (just a few lines).
The car is Citroen Jumpy 2002 RHX 2.0 HDi.
ECU 3plugs 0281010591 353871.
IMMO 845256
Have I modify 29F400BT dump as well?
Should ECU has Unlock status if I connect it on a table?
Any ideas?
Thanks in advance!

[rafal]

3 plugs - off in flash + eeprom