Sirius 32n

[nezocas]

Hi,

Have this ECU that is not CAN (It as got pin 58), to make immo off

I have TL866, but no adapter for it.
I have read that we can read this in boot mode with galletto.

I have tried:

pin87 gnd
pin 29/30 12vdc
pin 56 k-line
Gray boot in it?s place

But no joy... am I missing somethig, or wrong pinout

Regards

[Nef]

Hi,

Have this ECU that is not CAN (It as got pin 58), to make immo off

I have TL866, but no adapter for it.
I have read that we can read this in boot mode with galletto.

I have tried:

pin87 gnd
pin 29/30 12vdc
pin 56 k-line
Gray boot in it?s place

But no joy... am I missing somethig, or wrong pinout

Regards
Hope it will helphttps://uploads.tapatalk-cdn.com/20170419/468e022501756e28765beecc3219d83a.jpg

[mexanico1971]

lol !
What do you want to do width TL886 ?
De only way is to desolder the eprom get one adapter and read / write !
other way is to use K-line flasher and read it in boot mode

Brs

[nezocas]

lol !
What do you want to do width TL886 ?
De only way is to desolder the eprom get one adapter and read / write !
other way is to use K-line flasher and read it in boot mode

Brs

Flash IC is allready dessoldered... but no luck, no IC adapter....
Will resolder it back to the ECU and try boot mode again

[nezocas]

Hi,

I have had now a good reading with galletto.
Need IMMO OFF from this dump.

From what I have read, after reflashing it, I need to cut pin 58 inside ECU

[nezocas]

Made ECU flash .... VIRGIN..... with SCP data explorer
Is this dump correct....????

Regards

[vladanr]

car software do immo off ,or post model of car

[nezocas]

Renault clio II year 2000 1.2cc

[nezocas]

My file doesnt work.... car does not start .... pin 58 removed from car wiring

[Nef]

I make these off with rocketdump software. Im not at office at this time but I try to make you a correct off tomorrow

[nezocas]

Hi,

Car is:

Clio II 1.2cc 8v with A/C

ECU Sirius 32n
S110130114 B
8200064017
8200044437


Regards

[vladanr]

try this file444511

[binariman]

444529 1600 off ac
i think
best solution emulator

[binariman]

1200

444530

[nezocas]

try this file444511

THANK you vladnr, your file worked.

Files from user binaryman.... did not test.... but thank?s ant way....

Best regards

[Anzar]

Did immo off + to cut 58 wire worked for you?

[den64]

If you don't connect the L line it won't work. This ecu needs it to allow comms.