View Full Version : IMMO ON Please MK5
Point2003
21st April, 2017, 06:22 AM
hello
who can help me IMMO ON Please
444474
ucokseparoh
21st April, 2017, 07:23 AM
Immo ON ? Now.. that's totally a new term for me. :hmmmm2:
Point2003
21st April, 2017, 03:04 PM
hello
Yes immo on because here in germany it is not allowed to turn off immo
the engine runs but the speedometer indicates this
444574 VCDS 444691 444692 444693 444694
Login code from speedometer is available
Channel 01 Not exist
Channel 21 Not exist
Channel 50 error
Channel 91 error
Please help Thanks
Point2003
23rd April, 2017, 12:45 AM
help me Please :torn:
Gavra
23rd April, 2017, 01:58 AM
If you give more data about car u r working on more people will be able to help you. Nobody wants to guess what ECU did you read, which tool used and what tools you have to finish job....
haroutioun
23rd April, 2017, 06:41 AM
hello
who can help me IMMO ON Please
444474
Hello.
Dear, you load here ecu flash MED9.1 1K8 907 115 F, you must load eeprom too to return back immo on.
Point2003
25th April, 2017, 11:37 PM
hello:)
I use mapps v16 original version and VCDS Professional original version
my car : MK5 RGTI 2.0 TFSI with CDL energy and original ECU AXX With CDL softwear 1K8907115F the ecu is Changed on 370HP.
in the eeprom ist immo on i white it . in the eeprom is immo on and in the ecu off please on in the ecu Then it will work
This error is still available From Golf 6 R U0423 Please OFF this error an immo on wiht ECU Then it will work
Thanks to all
Point2003
30th April, 2017, 12:27 PM
hello
whats is the pincode from this ecu files ?? Can you tell me what a pin code this ecu has . I need it
446684
Thanks
haroutioun
1st May, 2017, 06:56 AM
hello
whats is the pincode from this ecu files ?? Can you tell me what a pin code this ecu has . I need it
446684
Thanks
Hello.
Dear, by flash file we can't extract pin code, normally it must be both files> (eeprom + flash dumps) from engine ecu, and the best way to get pin or adapt ecu its done by obd2. this you can found from dash or from engine ecu = the pin code, but by obd2. cause some times calculate by dump ecu can't accept, and to read manual the dash you must have good tool,by solder wires to read your dash, if your dash with (Micronas CDC3272) memory,so here just you can read the eeprom 24c32 and load it here we can give you pin code.
Point2003
11th January, 2018, 09:46 PM
oki here is my immo files eeprom. immo on please and i need the pin code thanks
Point2003
14th January, 2018, 01:28 PM
Nobody can help me?????:( at my problem
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.