PDA

View Full Version : Nissan Micra K12 Pin Code



amineben1992
21st April, 2017, 10:51 PM
Hello,

I need pin code (12 digit) for Nissan Micra 2004.

AVDI give me pin with 4 digit and after i entred it i get ''code not accepted'', i have programed the key with Tango but the car didn't star, now i want to try with obdstar x100 pros for that i need 12 digit.

I have this permanent error : U1001 and P1611


Any suggestion will be helpfull.

mexjack
22nd April, 2017, 12:08 AM
You need the 12 digits from the glove box

Enviado desde mi SM-G935F mediante Tapatalk

Bllinda
22nd April, 2017, 02:49 AM
Try .... D64D630E42B1
br


Hello,

I need pin code (12 digit) for Nissan Micra 2004.

AVDI give me pin with 4 digit and after i entred it i get ''code not accepted'', i have programed the key with Tango but the car didn't star, now i want to try with obdstar x100 pros for that i need 12 digit.

I have this permanent error : U1001 and P1611


Any suggestion will be helpfull.

amineben1992
22nd April, 2017, 01:49 PM
Here is code from glove box, Thank youhttps://uploads.tapatalk-cdn.com/20170422/900c5263bd8520b76fe069f31ec726cb.jpg

rokibar
22nd April, 2017, 04:03 PM
Here is code from glove box, Thank youhttps://uploads.tapatalk-cdn.com/20170422/900c5263bd8520b76fe069f31ec726cb.jpg
pin code: A56AAE846DB9

amineben1992
24th April, 2017, 12:44 AM
Thank you for your help, the pin is correct but still can't add key to this fa***ng car http://cartechnology.co.uk/images/smilies/headbang.gif, i have try with ID46 like the Tango manual said and with 4D60 but the KEY Light still On :mad-new:

If someone have any idea for this Problem i will be Thankful http://cartechnology.co.uk/images/smilies/thumbsup.gif

mexjack
24th April, 2017, 02:22 AM
The correct transponder is id 60, maybe the ignition switch is damaged

Enviado desde mi SM-G935F mediante Tapatalk

ucokseparoh
24th April, 2017, 04:59 AM
may be immo is locked? isn't it common on Nissan?

lion0304
24th April, 2017, 06:30 AM
Thank you for your help, the pin is correct but still can't add key to this fa***ng car http://cartechnology.co.uk/images/smilies/headbang.gif, i have try with ID46 like the Tango manual said and with 4D60 but the KEY Light still On :mad-new:

If someone have any idea for this Problem i will be Thankful http://cartechnology.co.uk/images/smilies/thumbsup.gif


Micra K12 use ID46 but you need remote key with PCF7946.

iD46 PCF7936 transponder cannot add to car.
445055

amineben1992
24th April, 2017, 03:28 PM
I will try with remote key and report.

amineben1992
24th April, 2017, 10:21 PM
I tryed with remote key but not success​ :( the car was on other garage before cams to me, the BCM and the ECU was opened, i think they corrupt some dump :dodgy:
Can same one give me good dump for ECU and BCM to try with, i think i need to verginiz the steering look to !!https://uploads.tapatalk-cdn.com/20170424/12a3028265ee6b23c2a01673e27f4e8a.jpg

lion0304
24th April, 2017, 10:45 PM
I tryed with remote key but not success​ :( the car was on other garage before cams to me, the BCM and the ECU was opened, i think they corrupt some dump :dodgy:
Can same one give me good dump for ECU and BCM to try with, i think i need to verginiz the steering look to !!https://uploads.tapatalk-cdn.com/20170424/12a3028265ee6b23c2a01673e27f4e8a.jpg

You need open the key and verifie if there are PCF7946 inside or read it with programmer.

This key has 2 type, 1 with PCF7936 and other with 7946.

amineben1992
25th April, 2017, 12:05 AM
I have open it and it was pcf7946 :banghead: