Original file BMW 0261S04115

[Walid khalifa]

Hi all,
Bmw E90 N46b20 ecu 0261s04115 please i need original file for manual transmission car.
My problem is I ecu can't detect EGS automatic transmission that i changed to manual so car can't acceleratehttps://uploads.tapatalk-cdn.com/20170427/60c79590ac104ce3143223e55a935c18.jpg

Sent from my SM-A710F using Tapatalk

[flashtech]

You could try to use WinKFP or ISTA to find and write that firmware.
Or use NCS Expert to code it from automatic to manual.

[Walid khalifa]

You could try to use WinKFP or ISTA to find and write that firmware.
Or use NCS Expert to code it from automatic to manual.
Ncs expert can do it?

Sent from my SM-A710F using Tapatalk

[makysplit]

U can use ista/p. Ncs need to change SA code but i don't know is thet enough..

[Walid khalifa]

Actually the car can't accerate the fault is missing can message from EGS

Sent from my SM-A710F using Tapatalk

[makysplit]

Do you know how to use ncs expert? If u know u need to modifay your SA number in all moduls like cas, kombi..... And then see what is going on! In SA number change automatic getribe for manual ..

[makysplit]

All SA code list in link...
http://www.e90post.com/forums/showthread.php?t=717103

[Walid khalifa]

Do you know how to use ncs expert? If u know u need to modifay your SA number in all moduls like cas, kombi..... And then see what is going on! In SA number change automatic getribe for manual ..
I will try tomorrow and report.
If you can clarify procedure because i m not familiar with NCS , or where should i code exactly to remove automatic transmission.
Thanks for your support

Sent from my SM-A710F using Tapatalk

[Walid khalifa]

You could try to use WinKFP or ISTA to find and write that firmware.
Or use NCS Expert to code it from automatic to manual.
Good morning i tried with winkfp and ncs but no way.
The solution is a full flash with manual transmission


Sent from my SM-A710F using Tapatalk