Sirius 32N Immo OFF S110138000B

[aqua_life]

Hello,
I have a problem with this Immo OFF...
ECU is S110138000B , 8200044437
I read flash inside ECU and after I compare with others Immo off files from forum I modified my Original file to make Immo off.
Car is far away and costumer tested it now and it is not ok. Costumer cut wire 58 from ECU.
Attached is original and my modified files.
What do you think about my immo off file ? Is it Ok or not ok ?

Thanks for your help

[aandroma]

typ engine details

[aqua_life]

Car is Renault Clio , year 2001 , engine 1.2 petrol , no AC

[dadal]

10000% immo off
pass after thanks+rep

[aandroma]

446274

here you go no pass

[dadal]

second file is not immo off, customer will ecu send back
my dump is made by the hand, not by soft

[dadal]

if you have ddt2000 you can see if ecu are immooff or not ( on bench) , dont need to have car

[aqua_life]

Thanks. I don?t have ddt2000.
I have Can Clip, Launch X431, autocom, ...
With these I can make diagnostic and check if immo is off ?
Thanks

[dadal]

I dont know dear Friend, may be Clip can do it, Dtt200 works with simple Vag KKL blue cable ( not on can-bus cars) and shows info about status of ecu virgin-immoff-key learned...
I think DK has this soft

[CHIKO]

HI YOU CAN CHECK THE IMMO WITH CAN CLIP ON BANECH
PIN 3+33 GND
PIN 29+30 +12V
PIN 26+56 DIAGNOSTIC LINE (K LINE / L LINE )
GOOD LUCK

[Shmortz]

here is your dump off, you can see immo state on bench with delphi/autocom

[dadal]

here is your dump off, you can see immo state on bench with delphi/autocomHi ShmortzCan you explain how can I see immo state with delphi ? I have tried today to see immo state but I cant find it in the menu of delphi ?