PDA

View Full Version : Maxboost for stage 1 megane 225



ivanrojo
1st May, 2017, 12:04 AM
Does someone know maxboost for a megane sport 225 (sagem 3000) in a stage 1?

I?m studing and trying to understad this type of ecu, on maps I saw 1,2 bar for maxboost, what i think is quite high for a stock car.

There are other boost maps, with lower values (over 0,8) which make mor sense to me but on my damos that map appears for limp mode mode (or I think so becouse it's on french acronyms)

Some help would be great!

Thanksss

icezero2010
1st May, 2017, 09:06 AM
post file fost picture from maps you don?t understand some maps real values and some factors there are diffence

ivanrojo
1st May, 2017, 11:33 PM
446942446943446944

Hi icezero here i let you some screen shots I also attached the ori file I read with some maps identified and some little modifications and a damos from where i?m studing the sagem 3000, I have also modified some maps on the damos.

Please don?t write those files on any car I don?t know yet if they are safe or not or if modifications are bullshit. As I say before i?m learning how this ecu works yet.

ON the other hand any help would be great.

biela
2nd May, 2017, 07:46 PM
Hello

May be .ols file seems corrupted?

ivanrojo
2nd May, 2017, 10:39 PM
Hi biela i uploaded again.

Hope now will be ok

daynight
3rd May, 2017, 07:10 AM
Max boost 1.2 bar peak, but it is dangerous because max torque on original conrods is 410 nm by specification. More than 400 nm will cause twist!

ivanrojo
3rd May, 2017, 11:11 AM
on the pictures I have attached 1.2 bar is for stock maps....

saxomania
3rd May, 2017, 08:26 PM
In which version of winols does it work?

ivanrojo
4th May, 2017, 04:09 PM
winols 2.24

biela
5th May, 2017, 08:38 AM
AA00 and AA12 are max boost limiters for safety.

I don?t think 5F38 is boost requested.

ivanrojo
5th May, 2017, 12:22 PM
i biela thanks for your help, do you know how much use to be boost request on this car??

How do you see the other mods i did?

biela
8th May, 2017, 01:54 PM
Hello

I am also learning about Sagem3000.

But looking at A24C, max torque seems to be at 4500 rpm, it is weird for me.
And AA12 will limit boost from 5500 rpm.

ivanrojo
8th May, 2017, 05:54 PM
thanks for your help biela, A24c i will change it a little bit with a higher rpm for max torque, at the begining i let max torque over 4500 because i dindt now if turbo could blow much more on high rpms?.

AA12 is stock yet i can?t find turbo request on this file.

biela
9th May, 2017, 08:51 AM
You need to read the attached pdf.

Excess88
14th September, 2018, 06:42 PM
Cant download that. I have s3000 so i wanna more boost and fuel cut off.