Golf tdi ajm + turbo asz

[luki2411]

Can samone may look on may mod and increase if can

[sdtsedat]

Your file is weak mate.
I make new file for you.

Try it and feel the difference.
Good remapped and performance file. Also EGR OFF.

If you like it, don't forget hit thank button and give reputation.

Pass sended on P.M.

Kind regards from Belgium

448145

[luki2411]

Your file is weak mate.
I make new file for you.

Try it and feel the difference.
Good remapped and performance file. Also EGR OFF.

If you like it, don't forget hit thank button and give reputation.

Pass sended on P.M.

Kind regards from Belgium

448145
I dont hawe aby p.m can you may sens again

[PowerPlus]

Custom Remap you need with touched N75 map for good results with your GT1749VA turbo
1.55bar no problem for this turbo

[luki2411]

Custom Remap you need with touched N75 map for good results with your GT1749VA turbo
1.55bar no problem for this turbo

Can you may try do some tuned file for me

[goyodesanctis]

Just vnt map NO!
You have to import PID control of N75 from asz and dt-1 pid.
If your maf ref Bosch is similar or reference sustitutive you have to import MAF linearisation and I would get a 3 map bar and change map linearisation too.
Then remap of vnt will be in the correct values.
Regards!

[PowerPlus]

Of course you have to change more than the n75 map, but I do not have to explain everything, or do you have so much time?
NO need to change 3bar map sensor !!!!!!

[goyodesanctis]

[Quote = PowerPlus; 3024246] Por supuesto, usted tiene que cambiar m?s que el mapa n75, pero no tiene que explicar todo, o tiene tanto tiempo?
No es necesario cambiar 3bar sensor de mapa !!!!!! [/ quote]
If you have big spool between 1800-2200 rpm. you will pass 2601 mbar suddenly. And then down. I would recommend install 3 bar map make linearisation and change diag limis 18 255 in 8 bit mode to 8 120 and 980 factor to 833 in 16 bit LoHi. Regards!

[PowerPlus]

[Quote = PowerPlus; 3024246] Por supuesto, usted tiene que cambiar m?s que el mapa n75, pero no tiene que explicar todo, o tiene tanto tiempo?
No es necesario cambiar 3bar sensor de mapa !!!!!! [/ quote]
If you have big spool between 1800-2200 rpm. you will pass 2601 mbar suddenly. And then down. I would recommend install 3 bar map make linearisation and change diag limis 18 255 in 8 bit mode to 8 120 and 980 factor to 833 in 16 bit LoHi. Regards!

GT1749VA big spool between 1800-2200rpm , ?hm you joke :chuncky::chuncky::chuncky:
if you remap n75 wrong ,then you can not control your pressure and overboost too much.

he only changed turbo from GT1749V to VA , no need to change your map sensor

[luki2411]

Is someone make tuned file for me good tuned file?

[goyodesanctis]

I can do but I will need to know what map sensor you have. With 67-68 mg and 1.56 bar@4000 rpm is enough for 170 cv without smoking playing with soi for stock injectors. I need two days. My baby is coming now!
Regards!

[luki2411]

I can do but I will need to know what map sensor you have. With 67-68 mg and 1.56 bar@4000 rpm is enough for 170 cv without smoking playing with soi for stock injectors. I need two days. My baby is coming now!
Regards!
I can wait if you can make file for me
Stock map sensor

[goyodesanctis]

Here you are.Press thx please if I helped.Pass PM.
Regards

448696

[luki2411]

Here you are.Press thx please if I helped.Pass PM.
Regards

448696

Im on work now i try later and let you know result

[goyodesanctis]

GT1749VA big spool between 1800-2200rpm , ?hm you joke :chuncky::chuncky::chuncky:
if you remap n75 wrong ,then you can not control your pressure and overboost too much.

he only changed turbo from GT1749V to VA , no need to change your map sensor

I do not think you understood me, sir.
From stock the turbo on the ASZ engine, with the factory map, behaves like this. Overboost at 1800 rpm and regulates down.
How many logs do you want me to send you, with peak pressure at 1800 rpm ???
And how many people who reprogram wrong, or do not modify the VNT map to 2000-2200 ???
Apart from this they do not modify SOI and do not take into account the amount of gases that is generated for EOI.
I think it will not teach you now, much less in VW TDI PD because my car is ARL engine, and I have been testing with it for two years, to leave it totally to my liking.
And I hope he does not feel bad, but it's no joke what about momentary over-pressure. The ecu monitors the demand and the specified one, and strip it down. Evidently, bad modification of the VNT map will aggravate the peak, and the underboost in the area of 2100-2300 rpm.
And ASZ engine from stock 3 BAR MAP SENSOR.Take a look and you'll find it.
Greetings.

[goyodesanctis]

Im on work now i try later and let you know result

OK,this afternoon I'll go to hospital, I think my son is going to be born today!!!.
Regards!!!

[luki2411]

OK,this afternoon I'll go to hospital, I think my son is going to be born today!!!.
Regards!!!
Best wishes for you and yours family i report result and i can send logs too if need

[goyodesanctis]

[Quote = luki2411; 3025400] mejores deseos para usted y los suyos familia i informe de resultados y que puede enviar registros tambi?n si necesidad [/ quote]
Thank you very much mate!!!
I hope you could send. I will take a look to make it perfect as I can. Regards!

[luki2411]

[Quote = luki2411; 3025400] mejores deseos para usted y los suyos familia i informe de resultados y que puede enviar registros tambi?n si necesidad [/ quote]
Thank you very much mate!!!
I hope you could send. I will take a look to make it perfect as I can. Regards!

Wait i send now
Group 011 http://vaglog.pl/log-011_DV9MW9.html

[luki2411]

Here https://youtu.be/uP0tqF_2j28 is how accelerate my car on this mod

[Ionut 21]

parola....

[goyodesanctis]

Hi,you can't send me a private message, asking for this password, I think I remember, without giving thanks and add rep If It helps you.
In case of mate, log was perfect and I would sau that It would help you.
Get a little information about how this place works before asking anything and you'll see It.
Regards