PDA

View Full Version : MB Sprinter 2.2 DPF OFF (EDC16C31 / 505836)



flashtech
10th May, 2017, 07:53 AM
Hi guys!
Yesterday was taking out dpf and damaged temperature sensor, so now my dpf off solution is not working. Car smokes and check engine light is blinking.
Maybe somenoe can help with dpf off with disconnected sensors?
Volta and ecusafe not working good with those.

EDC16C31
SW : 505836

Thanks in advance!

448892

vagva
10th May, 2017, 09:08 AM
here is your file
The differential pressure and temprature sensor have to be disconnected
press Thnx + Rep

flashtech
10th May, 2017, 10:48 AM
Maybe anyone else can make some solution? vagva solution is not working.

andkl2810
10th May, 2017, 10:53 AM
here is your file + tun

flashtech
10th May, 2017, 12:35 PM
Still no working solution. Disconnected sensors - there is no errors but check engine light is blinking all the time.

mihaiservice
10th May, 2017, 12:43 PM
Hi
You have to write back original file,start engine for 30 times ! engine lamp will stop blinking if there not are any other trouble related to boost pressure or a leak on intake system !

flashtech
10th May, 2017, 12:45 PM
Hi
You have to write back original file,start engine for 30 times ! engine lamp will stop blinking if there not are any other trouble related to boost pressure or a leak on intake system !
And than write back dpf off file?

mihaiservice
10th May, 2017, 12:51 PM
Yes,just write the correct dpf off file when check engine lamp have stop !

thank you !

gitko
11th May, 2017, 06:39 PM
hahahhahahhahahahhahahaha

30 time to start- what will happen with starter.

Better way 3 time start and turn off the engine, after each time must to remove key from the switch for 30 second and everything will be OK

flashtech
11th May, 2017, 08:12 PM
I done this by buying solution from tuning company.

mihaiservice
13th May, 2017, 09:18 AM
hahahhahahhahahahhahahaha

30 time to start- what will happen with starter.

Better way 3 time start and turn off the engine, after each time must to remove key from the switch for 30 second and everything will be OK

Nothing will be wrong with starter ! When are dtc meniu from Star just press F6 and entire description will pop up ! also the same "30 times" solution are for VAG cars !

bobolin4o
13th May, 2017, 04:18 PM
In my opinion and from my experience, the gitko's way is the right way.​​
But i think, there is no need to laugh that louder.
mihai have respectable experience, and didn't talk just to be told something...