Toyota G Chip Immobilizer Reset Free

[Brayn]

:)
Toyota G Transponder Reset Free.....

This is Toyota Corolla Immo G transponder 2011- 2014
this dump now Produced is in key registration state. you can add key (program key) without master key.
after write this Dump Immo indicator normally flash but you can program new key Using Diagnostic scanner , Toyota Techstream , x100 , T300 , SKP900 or any other key programmer

this Reset file for Free to all
Pass will PM after put THANK + REP

Enjoy

[ecufix]

:)
Toyota G Transponder Reset Free.....

This is Toyota Corolla Immo G transponder 2011- 2014
this dump now Produced is in key registration state. you can add key (program key) without master key.
after write this Dump Immo indicator normally flash but you can program new key Using Diagnostic scanner , Toyota Techstream , x100 , T300 , SKP900 or any other key programmer

this Reset file for Free to all
Pass will PM after put THANK + REP

Enjoy
Waiting for pass ?

[Brayn]

Waiting for pass ?
Can not send massage to you. Your inbox full. Clean your inbox [emoji1] [emoji1]

Sent from my F3216 using Tapatalk

[Slem]

Thank you Brayn very good post .. password please

Slem

[Krittanu]

Thank you..! pass pls.

[dana]

its useless dump guys, since every thing dump check-summed to CPU ID )))

[Brayn]

its useless dump guys, since every thing dump check-summed to CPU ID )))

mate first learn about Immobilizer and what is the Reset After ask questions. if do not need please be silent. person know well about this file.

[lion0304]

This guy is colector Reputation, not for contributation in forum (in this case, Thanks is enought)

[ecufix]

mate first learn about Immobilizer and what is the Reset After ask questions. if do not need please be silent. person know well about this file.
Please explain how to use it .

[ecufix]

Please explain how to use it .

Post #1 explains, thanks ,going to try it now

[lion0304]

Please explain how to use it .

Reset meaning: Factory state (no keys registed) and ready to programming news keys.

[just4upal]

Thank you Brayn .. password please

[winaiservice]

pass please Thank you

[Brayn]

Reset meaning: Factory state (no keys registed) and ready to programming news keys.
Virgin mean Original. (Brandnew)[emoji5] [emoji5]

Sent from my F3216 using Tapatalk

[Brayn]

pass please Thank you
Wait. I will send you. Some are told me unable to download this file
I will check and inform you ... [emoji4] [emoji4] [emoji4]

Sent from my F3216 using Tapatalk

[Brayn]

This guy is colector Reputation, not for contributation in forum (in this case, Thanks is enought)

if you need File tell me i will give you it. i do not need your Thanks and Rep :applause:

[Airbagtech]

Hi Brayn I have a 2011 Camry that came from action with a cut key, but the car didn't start and security light flashing. I plugged my T300 and no communication with Immo, so I purchased used one on Eplay and now it's good and I got communication, and reading said type 4, but when I try programming key it said failed!! The Immo as epprom 93c66, but not sure if key or system G, is G type5? The key as model 12bcm-01 and the Immo TK500M86E84582

PS can I please get pw for this dump, Thank you,, Louie ;)

[narkeleptk]

yes G is type 5. I doubt t30p will reset G system.

[Airbagtech]

so this car then must not be G because T300 said it's type4, do you know where I can get this dump? PS you're right T300 only goes up to type4,, ;( Thank you Louie

[narkeleptk]

i wouldnt put much trust in what t300 says. I would also put thr original immo back in car unless it has warter damage. The reason it couldnt conect is probably because its Type5.
My money is on the keyguy at auction has shit tools and couldnt program the key after he cut it. Auctions pay shit so they gey what they pay for.

[Airbagtech]

Hi Nark, the original immo is no good water damage clear to the eye, so that's why it had no communication at all also a friend with the original A.D tool also said no communication. I replaced with a used one from Epay and plugged it in and to my happyness there was communication with my T300 said it's type 4, so I don't think it's type5, but I'm listing the Immo part # TK500M86E84582 or 89780-06011 and the key model 128CM-01 if this helps. Anyway the Immo was behind the heat case and what a job getting to it. I was asked to post the dumps, so I attached them Dump 1 came from the original immo because although the immo was water damaged with no communication the eeprom was still read/write. The 2ed dump, Dump 2 is from the used immo, both used a 93C66. Hopefully someone can help maybe even bypassing the dump so I can get this car to start..

note: original immo module TN300W0910084 or 89780-06050
used immo module TK500M86E84582 or 89780-06011

Don't know if it mattered,,, Thank you Louie

[narkeleptk]

Ok,
2011 is a split year.
It can use type4 w/ toy44d key
or
type 5 w/ toy44g key.

I am on my phone so I can't currently check your dumps if no one else does and I get back to my office I will take a look for you.

When you do reset with t300. Itake key out and re insert key and remove (no turn
is light solid?
if yes then put key in ignition for at minimal 60 seconds. (do not turn)
then turn kry on off 6 ish times really fast.

use toy44d (4d67:72)

[narkeleptk]

looked at your dump.
file "1" looks to be typ5 - toy44G key
file "2" looks to be typ4 - toy44D key
So original immo box is type 5 and one you purchased to replace it is type4.

I dont know if you can use a type 4 immo to replace a type 5.
maybe you can put original data onto your donor immo and it will work.
*shrug* maybe someone else will know.

other then that my recommendation is to get a type5 immobizer. use original data from 93c66 and reset and add with better tool.

[moory565]

Thank you Brayn very good post .. password please

[Airbagtech]

looked at your dump.
file "1" looks to be typ5 - toy44G key
file "2" looks to be typ4 - toy44D key
So original immo box is type 5 and one you purchased to replace it is type4.

I dont know if you can use a type 4 immo to replace a type 5.
maybe you can put original data onto your donor immo and it will work.
*shrug* maybe someone else will know.

other then that my recommendation is to get a type5 immobizer. use original data from 93c66 and reset and add with better tool.

Nark, Question if you say it's a type5 then why is my T300 saying it's a type 4? The key that came with this car doesn't have a G stamped, so I'm thinking it must be a type 4. please let me know if you sure this is a type 5 then maybe my T300 is reading it as a 4 and so if this is the case I will then go get the right immo and also some G keys. thank you.

[narkeleptk]

Man, I'm no expert but this is my thoughts on the info you provided:

Looking at your dumps provided.
1.bin = Original (matches other type 5 files I have)
2.bin = Donor you installed (matches other type 4 files I have)

So I think the original immo box on car is a type5 G-key box and the box your trying to replace it with is a TYPE 4 immo box.


Nark, Question if you say it's a type5 then why is my T300 saying it's a type 4?
Because you installed a type 4 box so thats what t300 is trying to talk too.


The key that came with this car doesn't have a G stamped
Is it original oem key? It will have either a dot or a G stamped on it.

If it has neither or is an aftermarket key in new'ish looking shape then I would assume it was made by the auction's locksmith so he could mark it off as a finished key on his bill to the auction house. (in other words we can gather no information from this key as to what system the car uses)

What I would do:
>Get matching part number for immobilizer
>Flash bin from original to the new immobilizer module.

>Check ECU unit to ensure its not warter damaged as well. (cause if immo box was WD then its a good chance ECU was too)
If no WD> Great, then do nothing with it.
IF Has WD> Get matching part number ecu and transfer data from RA86 chip from old ecu to new ecu.

Then use tcode, techstream or another tool that can do type 5 and type 4 and do the appropriate reset adding in my own key.


<b>You prob should start your own thread. maybe you will get some better advice.</b>

[Airbagtech]

Man, I'm no expert but this is my thoughts on the info you provided:

Looking at your dumps provided.
1.bin = Original (matches other type 5 files I have)
2.bin = Donor you installed (matches other type 4 files I have)

So I think the original immo box on car is a type5 G-key box and the box your trying to replace it with is a TYPE 4 immo box.


Because you installed a type 4 box so thats what t300 is trying to talk too.


Is it original oem key? It will have either a dot or a G stamped on it.

If it has neither or is an aftermarket key in new'ish looking shape then I would assume it was made by the auction's locksmith so he could mark it off as a finished key on his bill to the auction house. (in other words we can gather no information from this key as to what system the car uses)

What I would do:
>Get matching part number for immobilizer
>Flash bin from original to the new immobilizer module.

>Check ECU unit to ensure its not warter damaged as well. (cause if immo box was WD then its a good chance ECU was too)
If no WD> Great, then do nothing with it.
IF Has WD> Get matching part number ecu and transfer data from RA86 chip from old ecu to new ecu.

Then use tcode, techstream or another tool that can do type 5 and type 4 and do the appropriate reset adding in my own key.


<b>You prob should start your own thread. maybe you will get some better advice.</b>

Thanks you helped me out a lot, I did notice on this thread talk about the newer programmer that did the G what's your thoughts. fellow up, I purchased the tool skp-900 and it seemed there is cuommunication with the original Immo, but it failed to program the new G key I also purchased and there's no option in this tool for all lost keys only for type4 (D) so it looks like my dump needs reset can you please do that for me. Thanks

[gurican]

pass please Thank you

[mozmoz]

pass please Thank you

[fixanycar]

Just recently had the same issues. Same 2011 and same immo part number. Used immo from 2010 and monkey working with eeproms. Took me some time figuring out. Tango with the right dump and as good as new.
In regards to water damages, check power and ground on the immo plug

Sent from my XT1650 using Tapatalk

[foulou0238]

pass please Thank you

[sertah501]

PASSE MERCI D'AVANCE

[Airbagtech]

hello I wrote prier and received very useful help with my immo model told the original module 89780-06050 was a type 5 (G) system and the one i tried replacing with part # 89780-06011 not the same and told it's a type 4 (D) so I took someone advice here and copied the type 5 dump from the bad original immo module and dumped it into the type 4 used good module, but I believe it might be good if I can use this reset dump you posted to try programming the key again, so can I please, please, please with a cherry on top have the password?

Thank you so very much. Lou

[Brayn]

hello I wrote prier and received very useful help with my immo model told the original module 89780-06050 was a type 5 (G) system and the one i tried replacing with part # 89780-06011 not the same and told it's a type 4 (D) so I took someone advice here and copied the type 5 dump from the bad original immo module and dumped it into the type 4 used good module, but I believe it might be good if I can use this reset dump you posted to try programming the key again, so can I please, please, please with a cherry on top have the password?

Thank you so very much. Lou
Send me your original dump file i will reset it for you

Sent from my F3216 using Tapatalk

[khanknot]

hey guys, i need avensis 2001 automatic immo + ecu pass 89661-05442

[narkeleptk]

Send me your original dump file i will reset it for you

Sent from my F3216 using Tapatalk


he posted it already. post 21 in archive is file "1.bin"
http://www.digital-kaos.co.uk/forums/showthread.php/596080-Toyota-G-Chip-Immobilizer-Reset-Free?p=3034896&viewfull=1#post3034896

Im curious to see if it typ4/typ5 imo interchangable :)

[sertah501]

Salut passe merci

[sertah501]

Salut psse svp merci d'avance

[mlwila]

Thank you
Password please

[mesut47]

pass please thank you

[pimpin]

hi can i get password please thanks in advance

[pezao]

pass please thank you

[Airbagtech]

Can I please please please get this dump or please edit me dump that I posted. I purchased the SKP-900 and just got it today, but when I try using the immo 2 being the new G type it only gives me 2 option add key, 2 erase keys. This is the problem option 1 asked for master key, i dont have. option 2 erase key same to be also needed a master key and will not erase that key, but will need it to complete this function. I hope I didn't just waste $375 on this SKP-900. Maybe if I reset the immo I can program the new key, so please can i get the password for this dump please or can you please reset my dump i posted. Sorry I din't know you asked for me to post my dump again, so I did before so please can you reset for me Thank you Lou

[Airbagtech]

Send me your original dump file i will reset it for you

Sent from my F3216 using Tapatalk Hello here's my dump Immo type 5 (G) 2011 Camry please can you please reset it for me. thank you Lou

[Airbagtech]

Sorry for the double post, I posted your request for the dump in another post on here and not for you to pass it up I'm posting for you here, so here's the dump please reset, thank you so much Lou

[Airbagtech]

question do you think the SKP-900 will program my new G key if I have one of you good people reset my dump I posted because I don't have the Tango? thank

[Airbagtech]

Hi Nark to answer you question no, I tried taking dump from the original immo G ending with 06050 and loading it into the type D immo ending with 06011 and my new SKP-900 still communicates with that immo as a type4. I also purchased 2 crypto G chips and i'm told were backward Compatible to a the D, yet wouldn't program either to the used immo type 4 or the original. BTW I dont think this original immo module was bad because my SKP-900 communicate with it, I just can program key failed, so I'm hoping bryan can reset my original dump i posted with part number ending in 06050

[narkeleptk]

Thanks for followup.
I'd send him a PM request.

[talk2idris]

Good share thanks for sharing

waiting for password
please send me paa

[Airbagtech]

Yes nark, i did pm him, hope he replied soon I got this car stuck in my driveway 3 month already. I purchased the SKP-900 I hope it works for programming a G key after IMMO reset. Thanks

[narkeleptk]

Dont kNow about SKP, but CK does them ok

[Airbagtech]

Send me your original dump file i will reset it for you

Sent from my F3216 using Tapatalk Hello Brayn not sure if I'm posting it in the right place, but here's the dump again, please reset for me. thank you Lou

[Airbagtech]

Nark, question does the CK work in U.S I saw a tool say toyota G all keys lost, but if you read the list, it said europe G all keys lost, update soon for america... also i ask please where is Brayn I really need his help to reset this dump i posted please.. If you cant please tell me and ill go buy a new immo module. Thank you.

[narkeleptk]

yes it works here well enough

[Airbagtech]

nark, you from U.S?

[narkeleptk]

that is correct sir.

[cyril]

hello password pls

[taxo1965]

Thank you Brayn very good post .. password please
The block is difficult to disassemble there.
Then you can use the hands to dump the key into the dump,Do not need this virgin file:(

[xtraktor]

Pass please, Thanks

Solve, no pass needed !

[pe locksmiths]

Pass please
Thanks

[risandino]

Brayn, thank you for your contribution.

[sadarmeng]

Hello Brayn not sure if I'm posting it in the right place, but here's the dump again, please reset for me. thank you Lou
i think it work for you sir... let try and look what to do security indicator.
pass PM+thnk

[Wilber Pardo]

Thanks Bryan this dump if it will work 100%, password please greetings.

[ador]

password please...

[beter]

sir please wait pass thanks and rep i was done for you thanks

[MJPOWER]

Thank You. Pass please

[talk2idris]

hello dear im still waiting for pass

[ayhanozdemir1982]

Pass please

[Andresolivares]

pass please bro...

[araby80]

:)
Toyota G Transponder Reset Free.....

This is Toyota Corolla Immo G transponder 2011- 2014
this dump now Produced is in key registration state. you can add key (program key) without master key.
after write this Dump Immo indicator normally flash but you can program new key Using Diagnostic scanner , Toyota Techstream , x100 , T300 , SKP900 or any other key programmer

this Reset file for Free to all
Pass will PM after put THANK + REP

EnjoyGreat job..,thanks

Sent from my SM-T561 using Tapatalk

[ALBERTO_]

[QUOTE = Brayn; 3028676] :)
Toyota G Transponder Reset Free .....

Este es el transpondedor Toyota Corolla Immo G 2011-2014,
este volcado ahora producido se encuentra en estado de registro clave. puede agregar la clave (clave de programa) sin la clave maestra.
después de escribir este indicador Dump Immo normalmente parpadea, pero puede programar una nueva clave. Utilizando el escáner de diagnóstico, Toyota Techstream, x100, T300, SKP900 o cualquier otro programador clave

este archivo de reinicio ~~~~~~~o para todos
Pase PM después de poner GRACIAS + REP

Disfrute [/ QUOTE ]

Password Please.

[lurossi]

excellent, great contribution, pass please, greetings.​
excellent, great contribution, pass please, greetings.

[sktanphg]

Thanks can I have your pass please.

[nonstarterautos]

Pass please thanks

[asdaly]

Thank You pass plz

[watsarun]

Thank you..! pass pls.

[engecu1]

Thank you.. pass pls.

[p251007]

Thank you.. pass pls.

[Ahmed8640]

Thanks for help

[JammerOne]

Thank you very much ... Can you share password please.. thanks

[takles]

Dear Brayn,
Password please. Many thanks.

[sfmaldo]

Thanks
Very good.

[Botos Leonardo]

Thank you.. pass pls.

[Aseke]

pass please Thank you

[umut auto]

thanks. pass pls

[Centurion Ls]

Thanks Mate
pass pls.

[Saman]

With my best regards can i get password? I have sent pm for you two times plus thanks and reputation

[nonstarterautos]

Hi may i plz have the pass

[venom27]

pass please , thank you

[cyril]

hello pls password

[m7md]

pass please

[hiba1]

hi thank you please pass

[hiba1]

thank you
thank you

[chowan]

What is password==??

[diimon]

send pass please

[vinh195]

thank you :crushed:

[innochambs]

Thanks....please password

[zilog357]

Hello Brayn. Thanks for the great share. May I have the pass please? Also, will it work on my Corolla 2013?

Thanks in advance.

[smartkeyprogs]

Thanks and repu added...May I have the password now?

[hijos1209]

Hello friend, good contribution. this file works only for toyota corolla?

[hijos1209]

I have a toyota fortuner 2010 with chip g

[itrescuer]

Password please

[daher]

Hi guys, i have one toyota where all keys lost, the dump was corrupted of immo 89780-42140 it used in rav4 model 2010
So how to solve this problem to make dump and key
thank u much

[motohacker84]

Thank you? waiting for the pass

[elhouda]

thanks my freind

[Meat-Head]

Passsssssssss thannnkkkkssssss

[Anachem]

thanks password pleasssssssssssssss

[zilog357]

Well, it's been almost 2 years. I hope Bayn is still around. Can you please send me the password of the file? I sent thanks (long ago) and rep today. Thanks in advance.

[AnarkA26]

Pass Plz...

[houdiag]

thank you my freind brayan four your information reset file is good .i need pass pls

[omar25py]

thanks pass please

[jacques23]

hi brian here is the files as per request on pm thanks appreciatte the last file is ktag read off the ecu

[artcom]

Brain. thanks and reputation.
Pass please

[artcom]

guys and anyone tried it? works?

[artcom]

I think it will not work. G immobilizer dump tied to the CPU ID

[artcom]

if you replace the eprom 93s66 from another immo then the immo will not work

[artcom]

on immo with 4d 67 it is possible to replace the éprom. but g doesn't work. checked on my own experience

[tato10]

hi, i have the same problem whit a corolla immobox 89780-12330 whit 4D70, i buy another immobox from second hand becouse the original was damage, i swap the eeprom but dont work, i try to make a new key by dump whit TANGO and don´t work too, could some body help me please to reset it? i leave my dump.

[richar]

aqui esta amigo ciclar dos llaves

[artcom]

hi, i have the same problem whit a corolla immobox 89780-12330 whit 4D70, i buy another immobox from second hand becouse the original was damage, i swap the eeprom but dont work, i try to make a new key by dump whit TANGO and don´t work too, could some body help me please to reset it? i leave my dump.

Trchstream reset it.

[jacques23]

i solved my problem ended up doing immo off with vehicles ecu file still waiting for reset file from this post would've been nice too have the reset file but vehicle needed to go out

[Amir15]

Thank you..! pass pls.

[Anachem]

Thank you pass please

[artcom]

hi, i have the same problem whit a corolla immobox 89780-12330 whit 4D70, i buy another immobox from second hand becouse the original was damage, i swap the eeprom but dont work, i try to make a new key by dump whit TANGO and don´t work too, could some body help me please to reset it? i leave my dump.

My friend your must swap eprom and cpu. EPROM and CPU

[Hailmary]

PASS please

[tato10]

aqui esta amigo ciclar dos llaves
hi, your reset dont work, i try to reset it whit many files but i can´t, i have both files from a working car 93c56 from ecu denso and 93c66 fom inmobox, i try to make a key whit tango and VVDI2 but doesn´t work.
i think the problem is on microchip on inmobox, becouse is from second hand, the two car are identical P/N ecu and inmobox, but it is clear that it is impossible to clone them. :(

[artcom]

I described the solution to your problem in the 124th post

[artcom]

PASS please

your must swap eprom and cpu. EPROM and CPU

[Tobby_35]

thanks friend.




:)
Toyota Gks Transponder Reset Free.....

This is Toyota Corolla Immo G transponder 2011- 2014
this dump now Produced is in key registration state. you can add key (program key) without master key.
after write this Dump Immo indicator normally flash but you can program new key Using Diagnostic scanner , Toyota Techstream , x100 , T300 , SKP900 or any other key programmer

this Reset file for Free to all
Pass will PM after put THANK + REP

Enjoy

[ayser]

:)
Toyota G Transponder Reset Free.....

This is Toyota Corolla Immo G transponder 2011- 2014
this dump now Produced is in key registration state. you can add key (program key) without master key.
after write this Dump Immo indicator normally flash but you can program new key Using Diagnostic scanner , Toyota Techstream , x100 , T300 , SKP900 or any other key programmer

this Reset file for Free to all
Pass will PM after put THANK + REP

Enjoy


Waiting for pass ?

[elhouda]

Thank you ..
password please

[saleh ahmed]

hi mate password please regards

[saleh ahmed]

hi mate password please regards

[Alsuhili]

thank you great post
pass please

[neimy]

Thank you Brayn .. pass please good luck to best

[elhouda]

Thank pls pass

[Alsuhili]

thank you pass please

[elhouda]

Thank you
Brayn password please

[oltianmunga]

pass please already thanked

[jgdf]

por favor el pass

[sfrank22]

hello friends, can someone help me to reset the immo box toyota corolla 2009 89780-02120 eeprom 93C56A all lost keys651842 thanks, regards....

[rybenz]

:)
Toyota G Transponder Reset Free.....

This is Toyota Corolla Immo G transponder 2011- 2014
this dump now Produced is in key registration state. you can add key (program key) without master key.
after write this Dump Immo indicator normally flash but you can program new key Using Diagnostic scanner , Toyota Techstream , x100 , T300 , SKP900 or any other key programmer

this Reset file for Free to all
Pass will PM after put THANK + REP

Enjoy
Password please. Thanks.

[abdallahindb]

thank you for the post pass please

[helloabuussama]

:)
Toyota G Transponder Reset Free.....

This is Toyota Corolla Immo G transponder 2011- 2014
this dump now Produced is in key registration state. you can add key (program key) without master key.
after write this Dump Immo indicator normally flash but you can program new key Using Diagnostic scanner , Toyota Techstream , x100 , T300 , SKP900 or any other key programmer

this Reset file for Free to all
Pass will PM after put THANK + REP

Enjoy

Thanks
password please

[abdallahindb]

thank you pass pleae

[legze]

hello
please pass.

thank you for advance

[moory565]

pass please Thank you

[mouh007]

Thanks for the idea

[wosi0]

Password please. Thanks.

[hong5065]

can i get
password

[Ringo24]

thanks
pass please

[guille2016]

hello send me the password please

[digikeys]

Hi Bryan can i have the pass please

[mouh007]

hi send me the pass
please

[wti]

hello friend, password please. grateful. magic buttons will be triggered

[nokwueze]

pls pass word friend

[Oxidoferroso]

@Brayn (https://www.digital-kaos.co.uk/forums/member.php/450023-Brayn)


Thanks in advance for your sharing, please provide the key to unzip,
kind regards

[ggman]

thanks you

[jassoyer]

Hello can I get a pass please.

Regards,
JAss

[DX AUTO]

Wait. I will send you. Some are told me unable to download this file
I will check and inform you ... [emoji4] [emoji4] [emoji4]

Sent from my F3216 using Tapatalk
added my thanks and reputation ,may i have the password please

[dosgarage]

Thank you Brayn very good post .. password please

[Sake]

:)
Toyota G Transponder Reset Free.....

This is Toyota Corolla Immo G transponder 2011- 2014
this dump now Produced is in key registration state. you can add key (program key) without master key.
after write this Dump Immo indicator normally flash but you can program new key Using Diagnostic scanner , Toyota Techstream , x100 , T300 , SKP900 or any other key programmer

this Reset file for Free to all
Pass will PM after put THANK + REP

Enjoy
pass please

[dosgarage]

Thank you..! pass pls.