Solution for ECU SID807EVO mileage

[denis1hr]

Hi m8s,


If you need to modify the mileage in SID 807EVO, you do not have to take the ECU off the car.


After changing the mileage on the dashboard, do not turn the key on.
Disconnect the positive and negative battery of the car battery and connect those cables together.
Switch the key on run with the cables connected for 30 seconds.
After 30 sec. Turn the key on offf and reconnect the battery.
Start the car and go with the diagnostic tool in the ECU.
The mileage is the same like on dashboard.


If you find these instructions helpful, please press thanks button..

[mapexo]

hi mate, Your solution can also work for ford connect?

[will4u69]

Hi m8s,


If you need to modify the mileage in SID 807EVO, you do not have to take the ECU off the car.


After changing the mileage on the dashboard, do not turn the key on.
Disconnect the positive and negative battery of the car battery and connect those cables together.
Switch the key on run with the cables connected for 30 seconds.
After 30 sec. Turn the key on offf and reconnect the battery.
Start the car and go with the diagnostic tool in the ECU.
The mileage is the same like on dashboard.


If you find these instructions helpful, please press thanks button..Does this work on any other Siemens ecus
Thanks

Sent from my SM-G950F using Tapatalk

[denis1hr]

Sorry m8s, don't know.
I didn't tried.

[galaxy0634]

denis1hr (http://www.digital-kaos.co.uk/forums/member.php/56776-denis1hr)
my man what about sid208?

[pierre renault]

Ok thanh you

[pica14]

thank you,ford transipt it is same

[SSK2012]

hi,

this solution work on PSA service history stored on eeprom ?

[jomberykaso]

hi,

this solution work on PSA service history stored on eeprom ?

no mate..........

[djoko.k]

Does it work for injector mileage?