Renault EMS 3132 S110140201A 8200326395 k-line or can?

[DigitalAutoRN]

Hi guys! can someone help me how to check if my ecu is k-line or can? i need to make it immo off, i think to use emulator. i reed in many post that i have to turn key in the inition position twice before start engine, or i have to disconect can before start engine and reconect it after starting, or i have to conect the gnd of starting relay directly to gnd. can some one help me?
thanks to all
450678

[alonedark]

try and report pleasel, cut pin 57

[cezars1]

immo off sirius 32

[cezars1]

you must cut wire 58 from ecu

[DigitalAutoRN]

hi guys, i resolve the problem with emulator, i put to FF FF all 64 C7 found in 29f200 from 4000 to 7FFF, then i install emulator and i cuted 57 and 27 (can line), and i made a modify through 2 relays and 1 button (normally closed) that disconect can before engine starting. i push the button, turn inition on, release the button, start engine i attach all file and information so you can use it like solution451829