View Full Version : Zafira 1.9 dpf off issue soot stop on 184 %
ecumix
27th May, 2017, 11:18 AM
Hello i need advice or solution i have zafira 1.9 150 ps after read /write by obd or bdm soot dpf start 510% and about 10 min stop 184%
so car still grow up oil can someone have this case its difficult to resolve .
After write orginal file soot its ok .
aem
27th May, 2017, 11:43 AM
this is bdm read?
ecumix
27th May, 2017, 12:42 PM
Yes bdm read by ktag
aem
27th May, 2017, 01:07 PM
did you reset all before writing?
ecumix
28th May, 2017, 08:21 PM
yes every time
mariusica_boy
28th May, 2017, 08:50 PM
Hello i need advice or solution i have zafira 1.9 150 ps after read /write by obd or bdm soot dpf start 510% and about 10 min stop 184%
so car still grow up oil can someone have this case its difficult to resolve .
After write orginal file soot its ok .
Your file dpf off tested many time and work 100%
Pass PM.
ecumix
29th May, 2017, 07:48 AM
tkanks so much
mariusica_boy (http://www.digital-kaos.co.uk/forums/member.php/117460-mariusica_boy) i tested ans report .
ecumix
29th May, 2017, 08:29 AM
Both file the same soot grow and less to 184%
aem
29th May, 2017, 09:16 AM
DID YOU CUT FILTER?
ecumix
29th May, 2017, 09:28 AM
Yes filter cut but remember when i write orginal file soot caclulate ok
Crazy case:)
aem
29th May, 2017, 09:38 AM
i am sure solution from my partener mariusica is 100% ok....
ecumix
29th May, 2017, 09:42 AM
I know . ..I know but i try find solution
mihaiservice
29th May, 2017, 09:51 AM
Hi
the latest calibration file for Opel cars its have such trouble,such file i`snt have any dpf off switch !
to bypass dpf you have to use "reversed strategy" !
ecumix
29th May, 2017, 10:21 AM
Maybe the last one solution
eculevel
29th May, 2017, 10:48 AM
try this453053
ecumix
29th May, 2017, 12:41 PM
eculevel the same error
aem
29th May, 2017, 12:50 PM
try to talk with mihaiservice....
ecumix
29th May, 2017, 02:04 PM
Now i try downgrade software and then .....we will see
cristim
9th February, 2019, 08:33 PM
Now i try downgrade software and then .....we will see
how did you solved?
i have same problem
mancioks
9th February, 2019, 08:51 PM
What is problem at stoping soot at 180%, regenetartions are still starting? I had some c39 that has soot stop at this number, but regenerations are no more active
cristim
10th February, 2019, 04:55 AM
the problem is bad acceleration up to 2500-2600 rpm...
after that, it is ok.
i have no dtc, no dash light
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.