E90 320d write error via obd

[levisdj]

Hello , I tried to dpf off this e90 ecu number 0281013501 I read the file via OBD with FG Tech, in writing it gave error, now I have a car that doesn't start.Can someone fix the file read OBD for BDM programming please ? Thanks in advance

[Dobermann]

Hello ! take ecu out ! make direkt connection from OBD Cable to ecu and write the ori file again ! if you need the pinout let me know !

if not work open ecu and read via BDM Port ! and post the file !

[lupu_sandu]

Write ori back, car will start.

[levisdj]

Hi, thanks for the quick reply, I wrote the original via BDM, same problem...Attach BDM and OBD read

[lechus111]

your File BDM = file OBD, bad file.Something confused

[lupu_sandu]

You need to write ori file via obd, not bdm.
If you are already write OBD2 file via BDM you are doomed.

[lechus111]

Let him read BDM properly

[levisdj]

Yes that's exactly what I did lupu sandu .... so what's the sollution now ?

[lupu_sandu]

Get a full bdm file for you ecu (flash) and program via bdm.

[smirnoff_rules]

http://www.digital-kaos.co.uk/forums/showthread.php/491133-help-for-ori-file-bmw-e90-320-edc16c35-0281013501-manual-trasmission

[levisdj]

Will I not have IMMO issues after ?

[lupu_sandu]

Nope.......................................

[levisdj]

Thanks alot guys, will try tomorrow morning and post results! Thanks again!!!

[gttuning]

Will I not have IMMO issues after ?
Write flash only..
In future if you see writing error dont switch ignition off just write back original file.

Sent from my SM-G935F using Tapatalk

[levisdj]

All sorted, found a full bdm with HW 501 SW 882, sync the CAS and it worked, thanks everyone for the advices!