View Full Version : DCU3R Boot mode solution
spirky
30th May, 2017, 09:09 PM
Hi all,
I search a solution to read TSOP 29F200BB of a ECU DU3R from Renault Kangoo in Boot mode without desolder it
Someone have the ecu pinout and the bootmode pin ? With wich tool i can read this ecu ?
Thanks for help
Br
spirky
30th May, 2017, 10:50 PM
It's ok ! I search and found it alone.
Here is the Pinout :
78 79 GND
76 77 81 +12
33 K
Here is the Boot pin
Read and write with Byteshooter ;)
Bye
453443
lupu_sandu
31st May, 2017, 04:53 AM
Galletto v54 can read/write this ecu in boot.
XJTAG
4th June, 2017, 01:25 AM
hello
yes galletto can read this , i have the galletto v48 read/write tested ok for me but with "BOOT SIEMENS 29F200.400BB CRIPT" driver
good luck for you
kamionk
6th June, 2017, 01:15 AM
Hi friends
How read dcn2 im looking boot whith no sukces . im have galetto v54 and no have manual for dcn2 .
Conect boot(grey) cabel to 24 or 28 pin 29f200 its not ok with siemens vdo end sagem2000
454814
WORK perfekt whith DCU3 option select !!!
ivanrojo
15th June, 2018, 04:21 PM
does sompne know if it is possible to read it with ktag? anf if it is which protocol must to be used?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.