PDA

View Full Version : DTC Removal On SID 807 Please Need Help



koolstuff
31st May, 2017, 09:56 PM
Hi Buddies
I need a complete DTC removal from the bin file of an ecu Siemens SID 807, Any help will be really appreciated.
Thanks

DTC P2137 P0228 P2127

koolstuff
31st May, 2017, 10:40 PM
it's been two weeks now i tried to remove those DTC but still no luck

sisco1
1st June, 2017, 12:33 AM
Avete gi? provato in quel modo?
It seems the accelerator pedal to be replaced

koolstuff
1st June, 2017, 07:09 PM
i have changed it already but until now the car can't go above 3000 rpm, i have checked all the wiring from the BSI, BCM, ECU, all seems to be OK

mihaiservice
1st June, 2017, 09:03 PM
Even with dtc off your car can`t go over 3000 rpm !

koolstuff
2nd June, 2017, 07:30 PM
mihaiservice (http://www.digital-kaos.co.uk/forums/member.php/106636-mihaiservice) so can you tell me what is the problem? is it in ECU or in car itself? Can you please share your knowledge?

mihaiservice
2nd June, 2017, 09:23 PM
The reason for limp mode are:
P0228 - Accelerator pedal signal 2 fault : Voltage too high
P2137 - Accelerator pedal signal monitoring fault : Consistency between the two pedal sensor signals

koolstuff
2nd June, 2017, 09:32 PM
But i have change the pedal twice, but still car is not going above 3000rpm

rm23
2nd June, 2017, 09:37 PM
wiring problem or ecu inside...

koolstuff
3rd June, 2017, 01:06 AM
Maybe Ecu, i have checked all the wiring.