PDA

View Full Version : Peugeot 206+ 1.4 HDI EDC17C10 DPF OFF



vladokovac
2nd June, 2017, 10:05 PM
I need DPF OFF and EGR OFF if possible for Peugeot 206+ 1.4 HDI EDC17C10. I'm sending original ECU flash dump.

Regards,

Vladimir.

454168

admirnexus
3rd June, 2017, 06:50 AM
here is your file, pass via pm....

454219

vladokovac
3rd June, 2017, 01:33 PM
I downloaded file, unlocked archive, everything is ok. I wrote file to ECU and that was successful. I have one question. Do I have to unplug EGR connector? What about DPF connectors too?

Regards,

Vladimir.

admirnexus
3rd June, 2017, 02:13 PM
I downloaded file, unlocked archive, everything is ok. I wrote file to ECU and that was successful. I have one question. Do I have to unplug EGR connector? What about DPF connectors too?

Regards,

Vladimir.

leave dpf connectors pluged, egr you can disconect

vladokovac
3rd June, 2017, 04:13 PM
What about additive level error P1446 and P15B3? I have this errors. How can I delete these errors?

admirnexus
3rd June, 2017, 11:57 PM
What about additive level error P1446 and P15B3? I have this errors. How can I delete these errors?

here are the file with deleted that two DTC, this will solve the problem... pass is same...

454360

vladokovac
7th June, 2017, 08:28 AM
I tried your file. DPF is ok, no error. But EGR is still showing error. I tried with disconnected EGR wire but error is still presented. There are P1446 and P15B3 errors too. Only DPD Off is working fine. Any suggestion?

Thank you very much,

Vladimir.

admirnexus
7th June, 2017, 12:50 PM
I tried your file. DPF is ok, no error. But EGR is still showing error. I tried with disconnected EGR wire but error is still presented. There are P1446 and P15B3 errors too. Only DPD Off is working fine. Any suggestion?

Thank you very much,

Vladimir.

OK friend, here is the final swiftec solution, try this, this should solve it... pass for file in PM...
Have a nice day

455143