i_shot_the_sheriff
7th June, 2017, 12:31 PM
Good evening mates,
I have a small problem with a Fiat Strada 2003 1.2 with 4AF.BP ecu and BSI with CAN.
Car needed immo off . I made immo off with ecuvonix , but car starts if i unplug one cable of the BSI. Problem is with cable unplugged i have problems with turn signals and temperature gauge!
If i disconnect the connector , start car ,,, then connect it again ,,, all works perfect ,,, but i don't wanna tell customer to do this everytime :chuncky::chuncky::chuncky:
Does anyone have any clue which wires should i cut (Can H , Can L) from the plug so i can make it work? If speedometer is not working is no problem for customer,,,,,
I cut the twisted pair on the wire but nothing ,,,,
Thanks in advance
I have a small problem with a Fiat Strada 2003 1.2 with 4AF.BP ecu and BSI with CAN.
Car needed immo off . I made immo off with ecuvonix , but car starts if i unplug one cable of the BSI. Problem is with cable unplugged i have problems with turn signals and temperature gauge!
If i disconnect the connector , start car ,,, then connect it again ,,, all works perfect ,,, but i don't wanna tell customer to do this everytime :chuncky::chuncky::chuncky:
Does anyone have any clue which wires should i cut (Can H , Can L) from the plug so i can make it work? If speedometer is not working is no problem for customer,,,,,
I cut the twisted pair on the wire but nothing ,,,,
Thanks in advance