PDA

View Full Version : Tech2win or Tech2GM or vxdiag VCX NANO or other. for testing GM Dashboards Gauges ?


borshch
7th June, 2017, 03:46 PM
need interface / software / tool to test GM dashboards Gauges.

was looking into tech2gm tool a bit pricey ($500)

found on ebay good prices on vxdiag vcx nano,
but will it work with tech2win software and connect to gm dash 'on the bench' ?
borshch
8th June, 2017, 02:55 PM
Or is tech2gm hardware tool better than software ?
nickolasd
8th June, 2017, 05:00 PM
you should be able to use any J2534 device with tech2win software. many different options available from cheap china tools to original Drewtech tools such as Cardaq plus 2. software can be found on any torrent tracker.
software will work good for diagnostic proposes, but i dont know about connecting on a table.
borshch
8th June, 2017, 07:23 PM
you should be able to use any J2534 device with tech2win software. many different options available from cheap china tools to original Drewtech tools such as Cardaq plus 2. software can be found on any torrent tracker.
software will work good for diagnostic proposes, but i dont know about connecting on a table.
thanks for the info.
borshch
8th June, 2017, 07:26 PM
just want to test gm clusters like here:

https://www.youtube.com/watch?v=zHHUKKHy2VE

at 7:40 here:
https://www.youtube.com/watch?v=3FL-whCgspw&t=43s
borshch
8th June, 2017, 08:54 PM
you should be able to use any J2534 device with tech2win software. many different options available from cheap china tools to original Drewtech tools such as Cardaq plus 2. software can be found on any torrent tracker.
software will work good for diagnostic proposes, but i dont know about connecting on a table.

I got tech2win from torrent (also gds but its vm and cant open in virtual box), but dont know which interface will work with it
clusters
8th June, 2017, 09:17 PM
just want to test gm clusters like here:

https://www.youtube.com/watch?v=zHHUKKHy2VE

at 7:40 here:
https://www.youtube.com/watch?v=3FL-whCgspw&t=43s

In the first video, that cluster has problems lol

Only the speedo and tach are sweeping, looks like it has an open in the Class2 Data circuit causing the other 5 gauges to not sweep. Could be the tool he's using though.