PDA

View Full Version : HELP! siemens PPD1.3 dead?



z786
7th June, 2017, 04:20 PM
Hi, i had a car come in today, had shit remap on it, i found ori file for same sw and hw and flashed it, flashing was successful, but car didnt start, i put the file from which the car came in originally, no start!

iv updated SGO and was successful, NO START!

i can communicate fine, but will crank but not start

any help is appreciated

car is a 2007 Audi a4 170bhp, PPD1.3 03G906018AQ

thank you

icezero2010
7th June, 2017, 05:18 PM
post your file

Babos
7th June, 2017, 07:01 PM
ask car owner maybe car have secureti button about you dont know!

z786
7th June, 2017, 09:58 PM
thankyou for ur replies, car has no secret button!
heres the 2 files

Meat-Head
7th June, 2017, 10:49 PM
Yo Z dude, try disconnecting the battery, remomber to reconnect afterwards

z786
7th June, 2017, 10:54 PM
yo Meaty, i tried that, also bridged terminals for 2 hours
nada zilch

Meat-Head
7th June, 2017, 10:58 PM
Ok next step try to read live data whildt cranking, have you tried an entire can of easy start?
everybody in tge street including the postman tried cranking untill starter catches fire?

icezero2010
7th June, 2017, 11:36 PM
Hi, i had a car come in today, had shit remap on it, i found ori file for same sw and hw and flashed it, flashing was successful, but car didnt start, i put the file from which the car came in originally, no start!

iv updated SGO and was successful, NO START!

i can communicate fine, but will crank but not start

any help is appreciated

car is a 2007 Audi a4 170bhp, PPD1.3 03G906018AQ

thank you

turn the starter? if not check clutch switch with tester

z786
7th June, 2017, 11:57 PM
yes the starter cranks, just no fuel injection taking place

easy start runs the engine until i stop spraying

Meat-Head
8th June, 2017, 12:12 AM
RETARD QUESTION:-

Does it start, run and die, or just lights on, nobody home

z786
8th June, 2017, 12:23 AM
it doesnt fire up at all mate

lsdlsd88
8th June, 2017, 07:10 AM
any dtc on vcds?

icezero2010
8th June, 2017, 08:12 AM
check rpm with vcds on start .

also the engine dont start if one pd element faulty

teamtuner
8th June, 2017, 08:50 AM
try to use kess recovery function...with shit origin file

z786
8th June, 2017, 05:54 PM
Has someone got a full BDM read for me please

vip65
8th June, 2017, 09:34 PM
[QUOTE = z786; 3049227] Има някой е получил пълна BDM прочетете за мен, моля [/ QUOTE]

z786
8th June, 2017, 09:42 PM
will this flash work with my SW version?

user2468
8th June, 2017, 11:41 PM
I head similar problem with this ecu, my problem was flash corrupted after read with mpps and i fixed via bdm with this version here http://www.digital-kaos.co.uk/forums/showthread.php/458309-Need-full-flash-dump-for-audi-a4-20tdi-170bhp?p=2456559&viewfull=1#post2456559