PEUGEOT 2061.1i magneti marelli IAW48P2

[coelhone]

hi, i have cleaned dump whith immokiler, the car starts ok but if go up to 5000rpm then stop
is needed cut some wire in this ecu
regads coelhone:rock:

[Meat-Head]

just try a scan, look at live data enginr rpm and see if it goes to 0 when it cuts, just incase the crank sensor

like ?12+vat something daft anyway.

but it is expected anything french, cure one fault gain 3 others.

[coelhone]

does anyone have original dump of IAW 48P2.76?
thanks

[auto_flash_tech]

does anyone have original dump of IAW 48P2.76?
thanks

you can download a new dump with pp2000 scanner it's eazy:idea:

[coelhone]

this is the story
i never had the dump of original ecu because she have water inside and flash can?t be read
whith another ecu i have burned the dump of immokiller in the flash , the car starts but don?t work fine
any ideas!!!!
maybe another dump whith immo off
thanks to all!
regards coelhone

[Meat-Head]

this is the story
i never had the dump of original ecu because she have water inside and flash can?t be read
whith another ecu i have burned the dump of im*okiller in the flash , the car starts but don?t work fine
any ideas!!!!
maybe another dump whith im*o off
thanks to all!
regards coelhone

so what your saying is, you had mo choice but to fit a previsoly enjoyed ecu, as it was a 'locked' ecu there way no way of telling if the ecu worked before hand, so don't worry.

a) was the 2nd hand ecu 'automatic'
b) does it now think it is a smastaautomatic

[auto_flash_tech]

try to change 29f400 and reprog it with a dump from:
im*okiller/file(dump)/peugeot/IAW48P2(as you reference of ecu) (http://www.digital-kaos.co.uk/forums/f114/peugeot-2061-1i-magneti-marelli-iaw48p2-60197/#post311753)
but the the clim will not work(in im*okiller dump the clim not work)...
if the car still not work fine,change the ecu..

[coelhone]

try to change 29f400 and reprog it with a dump from:
im*okiller/file(dump)/peugeot/IAW48P2(as you reference of ecu) (http://www.digital-kaos.co.uk/forums/f114/peugeot-2061-1i-magneti-marelli-iaw48p2-60197/#post311753)
but the the clim will not work(in im*okiller dump the clim not work)...
if the car still not work fine,change the ecu..
thanks will try change ecu

[Meat-Head]

thanks will try change ecu

but this time SAVE the ecu dump, or better still get the bsi and transponder chip as well.

[coelhone]

thanks will try change ecu
whith another ecu it?s the same thing :stupido2:

[coelhone]

solved
can be closed thanks all

[Meat-Head]

solved
can be closed thanks all

AND what the chuff was it?

please and thanks - in that order

[coelhone]

solved whith used ecu + bsi + tranponder key
sorry my english is not very good
thanks all

[Meat-Head]

solved whith used ecu + bsi + tranponder key
sorry my english is not very good
thanks all


thanks, it's french, cure one fault gain 3 others.