View Full Version : TRIUMPH BIKE with PIC18F458
CARPARTS
10th June, 2017, 09:11 PM
Hi
Some Triumph bike have PIC18F458.
anyone has succesfully read with ORANGE-5 this micro in circuit ? (Vss, Vdd, Vpp, Data, Clock)
If so, is there something extra to do then only those 5 wires to connect ?
automotrizVIP
10th June, 2017, 09:40 PM
Hello mate, to read those you must put the adapter for it. I do not know if I can be uncirculated, you should remove.
Adapter PICAVR
Adapter Microchip PIC12,PIC16 and Atmel AVR
http://www.scorpio-lk.com/images/orange5/adapters/newpicsapr14/PICAVR.png
lengtrung
11th June, 2017, 04:32 AM
This is same with Ducati Hyper 821 with pic32mx !
anyone successfully ?
gogalv
11th June, 2017, 08:14 AM
All pictures for orange 5, there are....
http://pavel-pervomaysk.com/en/
455945
CARPARTS
13th June, 2017, 07:37 PM
update :
i connected orange-5 as you shown in picture
pins are correct, same as in the datasheet from 18f458
but.... orange-5 do NOT read, ID, EEPROM, DATA, FLASH, all data is "00" , no matter what voltage you choose.
i removed the micro and read with specific adapter and BEEPROG+ , this works 100% ! ! !
tech_cz
15th June, 2017, 10:16 AM
Why you did not used ISP connector from the Beeprog?
CARPARTS
15th June, 2017, 03:54 PM
Why you did not used ISP connector from the Beeprog?
mmm, forgot to do........will try this next time
unu
6th October, 2017, 12:03 PM
mmm, forgot to do........will try this next time
tested ... working thru ISP connector with beeprog programmer.
AZol
13th April, 2020, 05:52 PM
could you read TRIUMPH BIKE with PIC18F458? I read the programmer kit3.5, but I can not calculate the mileage (
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.