PDA

View Full Version : BDM connections ED6106


zedgerman
10th June, 2017, 10:50 PM
Need ktag BDM connections for this ecu

Mercedes sprinter Bosch ED6106 CR4.20 , hw31.06 ,Sw24.07
morgano
11th June, 2017, 11:16 AM
Bosch bdm connection is standard.
zedgerman
11th June, 2017, 06:30 PM
I thought so but after connecting on the back side pins it says hardware configuration is different.I soldered on the left 10pins after flipping the board
morgano
11th June, 2017, 09:22 PM
Then maybe ecu is not edc16 family but edc17 and of course not mpc5xx based but tricore. So even you see 10 aligned pads they are no bdm because tricore mcu has not bdm access.