Honda CRV 2008 airbag read

[deluss]

Hello,
I have problem with read dump from airbag. I try to read 95640 on pcb by xprog but only read 00 00 00 00 or Ffff. Someone know what is wrong? Maby airbag need external vcc.

https://uploads.tapatalk-cdn.com/20170611/7dc5d2efddf82b950424bbcbeef1892b.jpg

[dragon100]

Desolder eeprom and read again ...

[deluss]

http://www.digital-kaos.co.uk/forums/showthread.php/466660-best-adapter-or-to-read-(eeprom-95640)-on-srs-77960-SNA-A219-M1?p=2499651&viewfull=1#post2499651

[deluss]

Need to clear this dump:

The problem is i can't clean dtc, the number of dtc clear is 255 so i think i need to clear dump.

[foks025]

Hello ,
here your file try it and post result


Good luck
Please press reputation and thanks button on my post thank you..

[deluss]

Somethink wrong with your file. Now i have other dtc:
92-21 - "Passenger airbag cutoff indicator open or short."

[foks025]

Fasten the 2.2 ohm resistor in the passenger airbag,then you will know if you have everything ok, in case you like to melt the plug, just plug in the plug is broken plastic that bends the jumper in the air bag,the plugged-in cause is many reasons,check first cause dtc even if the sensor is 100% rebuilt without dtc and you have something wrong in the car it will pop up error there are testers to check what is wrong and remove it

[deluss]

I have solved problem, change own my dump.

Now i have problem with Mat in the seat on passenger side. Do you know how to emulate this ?

[Edvardas]

you can do recaibrate with Honda hds, launch easydiag, and maybe do vpecker(not sure 100proc.)

[deluss]

Can i to turn off this odps with HDS tool ? or i need to program other dump to turn off opds ?