Fiat Ducato speed limit...

[bobolin4o]

Hello fellows!
I need to set speed limit at 100 km/h in this dump...
Any help is welcome!

[dominik.m]

Hi. Try this file if You want.

[bobolin4o]

Hi. Try this file if You want.

This was my first attempt - not working...

Someone else?

[Seselis5]

I think you can do this diagnostics
If you need to reduce the limit
But if you need to increase the limit then just reflash ECU + BSI

[icezero2010]

This was my first attempt - not working...

Someone else?
check adress 782da 4 x 30000 set it to 10000
also 794b8

i?m not sure but u can test

[bobolin4o]

I think you can do this diagnostics
If you need to reduce the limit
But if you need to increase the limit then just reflash ECU + BSI


No way with diagnosys...
BTW, there is not BSI.

[bobolin4o]

check adress 782da 4 x 30000 set it to 10000
also 794b8

i?m not sure but u can test

The first 4 x30000 not work.

Anyway, the bus is not here, i have a damos from Stilo edc15c7, will dig in it...

Thanks to ALL!

[icezero2010]

The first 4 x30000 not work.

Anyway, the bus is not here, i have a damos from Stilo edc15c7, will dig in it...

Thanks to ALL!

if this not work is the flash speed limiter not relevant 2 solution how u can do read eeprom :-)

second solution check if trq by gear is in the ecu set the trq to zero at this rpm you will

[bobolin4o]

if this not work is the flash speed limiter not relevant 2 solution how u can do read eeprom :-)

second solution check if trq by gear is in the ecu set the trq to zero at this rpm you will

Gear dependent TL are only for 1 and 3 gears - tested.