2011 FORD MUSTANG FILE NEED BR33-14B321-AE XC2361 56F

[AndriyM6]

Hello. I'm looking for complete bin file from 2011 FORD MUSTANG SRS control module BR33-14B321-AE XC2361 56F.
Preferably read with ETL programmer.
Thank you.

[mahmoudsaq]

Hello. I'm looking for complete bin file from 2011 FORD MUSTANG SRS control module BR33-14B321-AE XC2361 56F.
Preferably read with ETL programmer.
Thank you.
Put your file

[AndriyM6]

This file gave me two codes. #1 U3000:49 - Control Module - Internal Electronic Failure #2 U3000:46 - Control Module - Calibration/Parameter Memory Failure
Performed As-Built with IDS, but no changes. The module with this file came to me after another person tried to clear the crash.

[mahmoudsaq]

This file gave me two codes. #1 U3000:49 - Control Module - Internal Electronic Failure #2 U3000:46 - Control Module - Calibration/Parameter Memory Failure
Performed As-Built with IDS, but no changes. The module with this file came to me after another person tried to clear the crash.
You have chass no

[AndriyM6]

VIN number ?

[mahmoudsaq]

VIN number ?
Yes.........,,,

[AndriyM6]

1ZVBP8AM6B5136382

[mahmoudsaq]

what tools your used

[AndriyM6]

ETL programmer

[smt323]

Here is your file456603

[AndriyM6]

Here is your file456603

After adaptation with IDS AIRBAG lights go off.
ABS still on and show 2 codes: C0061 LATERAL ACCELERATION SENSOR, C0063 YAW RATE SENSOR.
Thank you.

[dragon100]

You need adaptation ...

[AndriyM6]

You need adaptation ...

ABS cannot communicate with sensors. what type of adaptation i have to perform?


Sensors built in SRS module. I think something wrong with this file.

[BestElectrical]

ABS cannot communicate with sensors. what type of adaptation i have to perform?


Sensors built in SRS module. I think something wrong with this file.

In this case you need to try another file that will match your sensors data inside the module.

Here are a few to test. Just use one that works with abs, then clear crash or post here to clear and change to your vin.

BE

[AndriyM6]

In this case you need to try another file that will match your sensors data inside the module.

Here are a few to test. Just use one that works with abs, then clear crash or post here to clear and change to your vin.

BE
Which tool do you use to read file?

[BestElectrical]

Which tool do you use to read file?


Carprog original

[AndriyM6]

Here is your file456603

With your file have only 1 ABS code "C0061 LATERAL ACCELERATION SENSOR"

[AndriyM6]

In this case you need to try another file that will match your sensors data inside the module.

Here are a few to test. Just use one that works with abs, then clear crash or post here to clear and change to your vin.

BE

With your file also have only 1 ABS code "ACCELERATION SENSOR"

[BestElectrical]

You tested all files i posted?

Sent from my SM-G935T using Tapatalk

[AndriyM6]

Yes. I think it has hardware problems. Already ordered from junk yard

Sent from my SAMSUNG-SM-J327A using Tapatalk

[AndriyM6]

Pick up today used module from junkyard, rogram with IDS and everything okay. thank you everyone who helped me

Sent from my SAMSUNG-SM-J327A using Tapatalk