Peugeot boxer 2.2hdi with EDC15c7 BOSCH 0281010484 Immo off and delete u1600 error

[securipro38]

Hi
I need immo off and delete u1600 error please,Peugeot boxer 2.2hdi with EDC15c7 BOSCH 0281010484 1329214080

Thanks a lot
Here is flash file

[baltazar3]

Hi
I need immo off and delete u1600 error please,Peugeot boxer 2.2hdi with EDC15c7 BOSCH 0281010484 1329214080

Thanks a lot
Here is flash file

Bad read m8.Use other flasher or programmer.

[securipro38]

Bad read m8.Use other flasher or programmer.
Hi here new read
Thanks a lot

[baltazar3]

Here is.....write both files...pm

[securipro38]

Here is.....write both files...pm
Hi
Thanks the car start with and without immobox plugged ,engine light on but the motor fan always stay on
Can you have a look again ?
Thanks a lot

[carloxgsxr]

please pass thnks

[rafal]

please pass thnks

post your reading.................

[carloxgsxr]

Hi , mi flash
Nedd imoff + chs ok Galletto V54

Thanks

[carloxgsxr]

Hi , mi flash
Nedd imoff + chs ok Galletto V54

Thanks

[tothzsolt]

engine light pls virgin eeprom and ok no light engine and good immo off solution....

100% immo off and u1600 off solution safe...

thnx and reputation for help and send you rar pass to pm....good day

[carloxgsxr]

thanks tothzsolt

[carloxgsxr]

good I already recorded the flash in boot mode and it does not recognize the ECU, error ECU NUMBER NO FUND.
Brick full.

[tothzsolt]

how do you have a problem when my solution is 100% checked several times and it works ok ... what didn't you do well, what is your programmer ???


car start or no start???

[carloxgsxr]

After flashing with Galletto V54 it no longer gives me the serial numbers when connecting.
1 I remove the Eprom and put a virgin
2 Bott
3 File Flash
4 I read and they are the same
5 When connecting it does not give me the serial number of the ECU.
I have tried it on 2 ECUs and it does the same 2 Brick, s

Thank you

[tothzsolt]

carloxgsxr (https://www.digital-kaos.co.uk/forums/member.php/540435-carloxgsxr)

try this it's my file immo off and eeprom virgin .... it will be fine

Boxer.BIN - immo off-U1600 dtc error off and chk ok

thnx and reputation button after send rar pass to pm...........

[carloxgsxr]

ok thanks, i'm going to try this eprom and comment.
When reading the serial number of the flash or the eproom?
Thank you

[carloxgsxr]

Good, I put the eeprom virgin with Immo Tool 1.5 and already if you read the HH and SW of the Galletto V.54 tomorrow I will test in the car if it starts ok.
¿Where does the serial N go in flash or eepron, what happens if there is one in flash 1329214080 and eeprom another 1037367790 ?????
Maybe that was the problem
Greetings and thanks

[carloxgsxr]

thanks tothzsolt
good, everything ok already starts and immo light is off.
Problem was that I had not disconnected the immo, I thought that canceling it on the 29f400 was enough. thank you very much for your help

[kiszka]

thanks tothzsolt
good, everything ok already starts and immo light is off.
Problem was that I had not disconnected the immo, I thought that canceling it on the 29f400 was enough. thank you very much for your help
tothzsolt is now under this nickname ecuprogramer (https://www.digital-kaos.co.uk/forums/member.php/708307-ecuprogramer)