PDA

View Full Version : Iveco edc17 soot reset


Saulyss
16th June, 2017, 05:04 AM
Hi ,
Maybe any aftermarket tool (like autocom truck) can reset soot on this ecu ?

Thank's
pawelelectro
16th June, 2017, 05:51 AM
Hi ,
Maybe any aftermarket tool (like autocom truck) can reset soot on this ecu ?

Thank's

Original autocom can do it.
daynight
16th June, 2017, 08:53 AM
Clone autocom can also, but only with original dump in ecu! :)
jurebv
12th January, 2019, 07:14 PM
Which version??? I always get message failed
daynight
12th January, 2019, 08:16 PM
2014.3 tested, also 2016. Need ori software in ECU. reset, then write mod dpf off
jurebv
13th January, 2019, 07:21 PM
I get some message about incorrect code with autocom 2016.0 but found solution

Solved. For anyone in similiar situation : write ORI file back, warm engine to 90C° working temperature, start engine and put in parking/idle and shut off . Then ignition on and press&hold both throttle and brake pedal until DPF light start flashing (takes a few tries until it works) Release both pedals and start the engine without touching any pedals.Let the regeneration complete (cca.20-30mins)after then shut off engine and write DPF off file.