PDA

View Full Version : 2007 Peugeot 207 1.6 hdi edc16c34


javyb
19th June, 2017, 05:49 PM
Trying to read this ecu bdm with ktag I get error hardware configuration not supported. With fgtech v54 it says micro not supported. Tried bdm 100 give error too

Sent from my SM-G950F using Tapatalk
ibrasport
19th June, 2017, 06:44 PM
Read it by xprog will read

Sent from my LG-K430 using Tapatalk
javyb
19th June, 2017, 06:46 PM
I don't have xprog

Sent from my SM-G950F using Tapatalk
baltazar3
19th June, 2017, 06:51 PM
Trying to read this ecu bdm with ktag I get error hardware configuration not supported. With fgtech v54 it says micro not supported. Tried bdm 100 give error too

Sent from my SM-G950F using Tapatalk
Post pic of ECU and zoom micro
javyb
19th June, 2017, 06:55 PM
Post pic of ECU and zoom micro
https://uploads.tapatalk-cdn.com/20170619/a4551128520e8dd84c4c44142a297797.jpghttps://uploads.tapatalk-cdn.com/20170619/cae6c91d2d8049662ea126b5e6aa9dac.jpghttps://uploads.tapatalk-cdn.com/20170619/84c1d90b252b19d260015f5a02e6680a.jpg

Sent from my SM-G950F using Tapatalk
baltazar3
20th June, 2017, 09:05 AM
FGTech must do it.Here is pics from manual.Check connection.
javyb
20th June, 2017, 11:13 AM
FGTech must do it.Here is pics from manual.Check connection.
It says micro not supported. I've only ever had this issue eith an A6 once 2004.

Sent from my SM-G950F using Tapatalk
catala20032004
20th June, 2017, 04:10 PM
Try to read via OBD2 see if that works ok
joze
20th June, 2017, 08:47 PM
Must read if ecu is fine, if ecu is damaged you can't read trough obd or bdm


Enviado desde mi iPhone utilizando Tapatalk
baltazar3
21st June, 2017, 10:20 AM
It says micro not supported. I've only ever had this issue eith an A6 once 2004.

Sent from my SM-G950F using Tapatalk
Try software update with PP2000 or LEXIA.After update try OBD read again.