Don?t star audia6 edc17cp14 with magicpro X17

[alcorte]

Good morning. I have a big problem.
I have an audi a6 caha edc17cp14 tc1796. I have read the ecu, on bench. Iron &eeprom.
I upload files.
Then I wrote the iron with tprot off in bench. I upload file. Writing, it takes only 57 seconds


And now the car does not start.


And it does not respond by obd, only in boot mode in bench.


I've tried recovery from the irom and eeprom and I'm still the same.


When I try to identify the ECU by obd , error.


But in bench, in boot mode, I can read & write & recovery (eeprom & irom). But the car does not start, and I can not detect the ecu by obd.


--
Identification ECU
Connecting to ECU...
Finished with ERRORS

[icezero2010]

first u dont need to unlock this ecu is tp 2 :-)

i think you have damaged the ecu by open or you have anywhere metal filing

clean complete ecu with air

write org back and test

[alcorte]

I do not understand is because I can read it in bench perfectly, and obd no.

[alcorte]

Support magicpro, said me , ecu damage.

n this case the boot pin of the microprocessor is damaged and the ecu cannot return in OBD condition.
You can try to clone the ecu used another compatible hardware and the service available on our helpdesk called:
VAG MEDC17 Clone

[icezero2010]

I do not understand is because I can read it in bench perfectly, and obd no.

boot is another than obd :-) u can damage so many on ecu and read by boot but never more obd

[alcorte]

I am trying to see, if I have removed something (condenser, etc.) and I find nothing. Can it be because of the heat it gave him to open it? I would like to know, because this has happened to me. Because it has already opened many edc17 and always well.
Once, I moved a condenser. But it has not happened to me again.

[gezame]

Hi
Software is tprot v02