mikkhh
22nd June, 2017, 08:42 AM
Friend of mine decided to pull out the a4 b6 cluster, because somebody had put tape in front of the airbag light and as a result the car did not pass mot. The airbag fault was in a crash sensor and after replacing the sensor that friend reinstalled the cluster, but one plug was not on tight and the cluster acted strangely and car did not start. But after that temp gauge and fuel gauge are dim and they are not moving. There are no fault codes for anything and the temperature readings are correct, the onboard computer still shows estimated mileage so the fault must be in dash. What should be done about it? I have tried reconnecting the battery ect. Maybe there are fuses on the cluster or are those motors dead?