View Full Version : W211 need help
DjRomeoR
3rd July, 2017, 05:32 PM
Hello,
I have w211 2006year 2.2CDI edc16c2 and in ecu are
P2621- Ash content of diesel particulate filter TOO HIGH. <_ fault code
i cheked with bosch,avdi no reset ore adaptation function :/
and in cluster are always fault code " Echaust filter carry out service in 50km.
Maybe some one can remove me DPF from file maybe this helps and wont show this fault code in cluster.
Thank you all/.
teerak2uk
3rd July, 2017, 05:36 PM
You will also need to drill dpf
DjRomeoR
3rd July, 2017, 06:19 PM
You will also need to drill dpf
without file i dont want drill
maajkii
3rd July, 2017, 06:27 PM
If you doesn't drill, then you make your Dpf full and car can stop... change your Dpf ( expensive ) or drill it (it's cheap ) :p
Wysłane z iPhone za pomocą Tapatalk
DjRomeoR
3rd July, 2017, 06:31 PM
If you doesn't drill, then you make your Dpf full and car can stop... change your Dpf ( expensive ) or drill it (it's cheap ) :p
Wysłane z iPhone za pomocą Tapatalk
If i drill not need write file removed dpf file ? :/
teerak2uk
3rd July, 2017, 06:43 PM
Yes drill for no damage to engine.
Delete to stop regen. Dtc. Limp mode
maajkii
3rd July, 2017, 06:56 PM
If you need DPF OFF. u need to - DRILL DPF, and REMOVED DPF FILE...
DjRomeoR
3rd July, 2017, 07:03 PM
If you need DPF OFF. u need to - DRILL DPF, and REMOVED DPF FILE...
so here i asking removed dpf file maybe someone can help me. and after what i drill dpf.
maajkii
3rd July, 2017, 07:20 PM
so here i asking removed dpf file maybe someone can help me. and after what i drill dpf.
First Drill, then flash DPF OFF File.
teerak2uk
3rd July, 2017, 07:21 PM
Hello,
I have w211 2006year 2.2CDI edc16c2 and in ecu are
P2621- Ash content of diesel particulate filter TOO HIGH. <_ fault code
i cheked with bosch,avdi no reset ore adaptation function :/
and in cluster are always fault code " Echaust filter carry out service in 50km.
Maybe some one can remove me DPF from file maybe this helps and wont show this fault code in cluster.
Thank you all/.
Test/Report and use tool to correct checksum
460685
maajkii
3rd July, 2017, 07:57 PM
Test/Report and use tool to correct checksum
460685
Here are chks ok.
460694
DjRomeoR
4th July, 2017, 07:14 AM
Here are chks ok.
460694
all working perfect no fault in cluster only in engine ecu are P2621 fault code .
robowork
4th July, 2017, 08:12 AM
p2621 test and report this code is now is off
DjRomeoR
4th July, 2017, 12:55 PM
Thank you all for help.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.