PDA

View Full Version : Peugeot 407 2.0 HDI SID803A need DPF and EGR OFF



AleXPaiN
5th July, 2017, 04:41 PM
Hi friends
I have Peugeot 407 SID 803A that fap is removed and goes to regeneration,i tryed with volta and ecu safe and still goes to regeneration,
tryed removing the additive ecu from instalation list still goes to regeneration when coolant over 70-80c .

I tryed resseting sooth level before dpf off but same.

can anyone desable fap in this ecu

In attach is original read

Tamaki
5th July, 2017, 06:24 PM
HERE YOU GO.461209

lsdlsd88
5th July, 2017, 08:36 PM
HERE YOU GO.461209

not good! you erased a lot of stuff at 0x4E3xx-0x4E4xx

try also this

AleXPaiN
6th July, 2017, 07:40 AM
thank you I will test and report

dorofteius
6th July, 2017, 08:47 AM
I am having the same problem with exactly the same car, same ecu.
I bought like 3 diffrent solutions , and it is still regenerating.
It is driving me mad for 2 months now.

AleXPaiN
6th July, 2017, 09:21 AM
and wat is solution
please make working 100% solution

lsdlsd88
6th July, 2017, 09:30 AM
I am having the same problem with exactly the same car, same ecu.
I bought like 3 diffrent solutions , and it is still regenerating.
It is driving me mad for 2 months now.

post your files!

dorofteius
6th July, 2017, 09:31 AM
No solution untill now. Still regenerating at aprox 700 km.461322
Exactly the same. 407 sid803a 2006 manual gearbox, RHR .

immokill
6th July, 2017, 10:00 AM
mate try this no checskum calc

AleXPaiN
7th July, 2017, 07:25 AM
not good! you erased a lot of stuff at 0x4E3xx-0x4E4xx

try also this
no work friends again regeneration
please make working solution stop regeneration please

lsdlsd88
7th July, 2017, 08:01 AM
did you have errors with original file? did you zeroed dpf parameters with diagnosis before loading dpf off file?

do you still see things like "soot mass" or "filter clogging %" in diagnosis?

dorofteius
7th July, 2017, 08:05 AM
I have-it to 0. But it is still rising.
Also I can tell that Swiftec solution does not work eyther .

AleXPaiN
11th July, 2017, 02:26 PM
Thank everyone who helped me.I did as you told me.back original dump,resset DPF parameters and write new dump And for now everything is fine.thank you