leon.79
5th July, 2017, 08:14 PM
Hi
I wanted to make an extra key for E class E430 gasoline W210 year 1999
I soldered out 1d69j and read data with xprog, my etl programmer does not work.
I lost data in outside mcu , but car starts.
I got dat out the inside mcu 1d69j and wrote it in the outside ecu and veryfied okay.
Calculated extra key and programmed key.
Soldered everything back and installed ezs in the car. The car starts with original key but no remote.
The car also starts with the extra key i made but also no remote control working.
I let the new key in the ignition for 30 minuites for sync but still no remote control (the button inside the car for opening and closing the doors work fine)
My problem now
1. No remote
2. Blink light blink every 3 second
3. No power windows
Does someone have or can make a good dump for cpu1 outside mcu from the dump of the inside mcu?
Thanks
I wanted to make an extra key for E class E430 gasoline W210 year 1999
I soldered out 1d69j and read data with xprog, my etl programmer does not work.
I lost data in outside mcu , but car starts.
I got dat out the inside mcu 1d69j and wrote it in the outside ecu and veryfied okay.
Calculated extra key and programmed key.
Soldered everything back and installed ezs in the car. The car starts with original key but no remote.
The car also starts with the extra key i made but also no remote control working.
I let the new key in the ignition for 30 minuites for sync but still no remote control (the button inside the car for opening and closing the doors work fine)
My problem now
1. No remote
2. Blink light blink every 3 second
3. No power windows
Does someone have or can make a good dump for cpu1 outside mcu from the dump of the inside mcu?
Thanks