MB DELPHI DCM 3.2 BDM

[carmageddon]

hi

can someone please check if this connections are right?

thanks in advance

https://s13.postimg.org/tnpj64mv7/dcm3.2.jpg (https://postimg.org/image/tnpj64mv7/)

[carmageddon]

50 views and non one have tested bdm on delphi dcm 3.2 mb?

[kamsky]

Hi. Are you read this ecu with this conections?

[nizarben]

here is the good connection481955
I read with ktag

[nizarben]

here is the good connection481955

I read with ktag

[smirnoff_rules]

use an old edc16 as above and solder your Adapter 14AS00T04S from your ktag kit

like this l saw on another forum https://i.gyazo.com/536feb6b361f94f945ecbce24d40c63c.png

[kamsky]

Thank You very much Guys

[kamsky]

Sorry, for my question if is stupid. But if i compared this two pictures, pin 1 and 10 from cable, dosn't fit.

[kamsky]

Ok. Finaly I found conections. Maybe i can help someone.