View Full Version : peugeot bosch airbag clear
yeager
8th July, 2017, 01:11 PM
hi, can someone help me clear crash in bosch 0285010828? thx
https://ufile.io/flca4
foks025
8th July, 2017, 01:24 PM
Hi
Hello
here is your dump cleared
good luck and don't forget to post result
dragon100
8th July, 2017, 01:25 PM
Your cleared file.
yeager
8th July, 2017, 01:36 PM
i make same versions as you, but after i put it to car i get error
698 driver and passenger side switch
yeager
9th July, 2017, 09:13 AM
i write back original file then your files
DTC oriinal
6A0 - Triggering of the pretensioner
- Not recognized
- Permanent
6C1 - Right side Airbag Deployment Controll
- Not recognized
- Permanent
DTC whit your file
698 - Driver and passanger pretensioner in series
- Top limit
- Permanent
foks025
9th July, 2017, 09:56 AM
i make same versions as you, but after i put it to car i get error
698 driver and passenger side switch
What diagbox do you diagnose, diagnose the driver, pay the driver, pay diabox or give a 2,2 ohm resistor
yeager
9th July, 2017, 11:09 AM
put resistor whit ori file, or whit mod file?
yeager
9th July, 2017, 04:32 PM
can someone exlaind me, when i make ecu virgin, why come DTC that was before not present?
foks025
9th July, 2017, 10:14 PM
i write back original file then your files
DTC oriinal
6A0 - Triggering of the pretensioner
- Not recognized
- Permanent
6C1 - Right side Airbag Deployment Controll
- Not recognized
- Permanent
DTC whit your file
698 - Driver and passanger pretensioner in series
- Top limit
- Permanent
698 - Driver and passanger pretensioner in series to the file in which you have this error
If you upload a virgin file then you have to do the configuration frontal cushions, tensioners, sensors so you have more mistakes
yeager
10th July, 2017, 06:26 AM
Ok, but dont understand why i dont have this error whit original file, i think whenn is wrong then it will be present whit original file too ...
foks025
10th July, 2017, 08:42 AM
whit mod file
yeager
10th July, 2017, 03:52 PM
Yes, this dtc is only whit mod file, whit orifibal no ... Thisway i think, mod file is not good, something is deleted that must not be deleted
foks025
10th July, 2017, 06:24 PM
Hi
Upload this file 100% ok if it does not go out the light it has something wrong in the car
What are you diagnosing autocom, diagbox, avdi .......
yeager
10th July, 2017, 08:11 PM
Have autocom and fvdi ...
yeager
11th July, 2017, 02:25 PM
Hi
Upload this file 100% ok if it does not go out the light it has something wrong in the car
What are you diagnosing autocom, diagbox, avdi .......
whit this file i have 3 DTCs not presented before
698 - Driver and passanger pretensioner in series
- Top limit
- Permanent
60B - Left-hand side curation airbag circuit
- Top limit
- Permanent
60C - Right-hand side curation airbag circuit
- Top limit
- Permanent
but i think when it will be realy damaged, then this errors will be presented whit all files ...
foks025
11th July, 2017, 05:20 PM
Hi
In my last file there are curtains you probably do not have, Put 2.2 ohm resistors on the tensioner to load the test file and it must be fine.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.