PDA

View Full Version : I need help with Megane 1.5 dci map



velaneando
14th October, 2009, 06:28 PM
I have a Megane 1.5 dci 80cv.
I read the map with galletto but I don?t find the software to change it, because the ecm2001 don?t have the driver.
I look for the driver and find a lot of but not that driver


This is my map
http://www.megaupload.com/?d=USWYORJD

Lacko_1
14th October, 2009, 06:45 PM
Hi,
Send me the file and i make that.

Lacko_1

ecm version?

Dobermann
14th October, 2009, 07:36 PM
I have a Megane 1.5 dci 80cv.
I read the map with galletto but I don?t find the software to change it, because the ecm2001 don?t have the driver.
I look for the driver and find a lot of but not that driver


make your own driver !!!

post the ori file please

velaneando
15th October, 2009, 11:34 AM
Hi,
Send me the file and i make that.

Lacko_1

ecm version?

The Ecm version is 5.1
and this is the file
MEGAUPLOAD - The leading online storage and file delivery service (http://www.megaupload.com/?d=USWYORJD)

velaneando
15th October, 2009, 11:35 AM
make your own driver !!!

post the ori file please


Please, can you tell me how make my own driver.

velaneando
23rd October, 2009, 12:48 PM
Please someone than help me,
thanks so much

gezame
24th October, 2009, 12:26 AM
I have a Megane 1.5 dci 80cv.
I read the map with galletto but I don?t find the software to change it, because the ecm2001 don?t have the driver.
I look for the driver and find a lot of but not that driver


This is my map
MEGAUPLOAD - The leading online storage and file delivery service (http://www.megaupload.com/?d=USWYORJD)

Hi,
This file is a partial reading of the flash, only the zone maps.
Alientech drivers, need to complete reading the flash to work. (for this reading, does not serve any driver ecm)
Regards.

Dobermann
24th October, 2009, 09:13 PM
Hi,
This file is a partial reading of the flash, only the zone maps.
Alientech drivers, need to complete reading the flash to work. (for this reading, does not serve any driver ecm)
Regards.


gezame is right !!!!

thats ecactly the same that i told you !!

you must read the full file of this ecu !!

velaneando
3rd November, 2009, 01:55 PM
I think than the file it?s perfect,
I try to read another time and is the same.
I?m thinking than my galleto is out.
thanks

powerinyeccion
12th July, 2010, 11:01 PM
File potenciado con CS OLS powerinyeccion.

driana
26th January, 2011, 11:27 PM
this post and the old. I was watching the maps. map rail pressure source does 1400bar and this modification is to 1700bar. the pump can handle?

waldi1979
26th January, 2011, 11:52 PM
1400 -> 1470

driana
27th January, 2011, 12:35 AM
sorry you have reason. I must be drunk

driana
27th January, 2011, 01:06 AM
hello can you tell if you know what map is this? does it have to do with pressure sensor turbo?

grinovsky
27th January, 2011, 09:07 AM
limiter turbo presure map

driana
27th January, 2011, 11:46 AM
thanks for the reply

alfy
27th January, 2011, 08:35 PM
I think than the file it?s perfect,
I try to read another time and is the same.
I?m thinking than my galleto is out.
thanks

Your galletto is OK, only partial read on this ECUs with galletto.

ominimicu
27th January, 2011, 09:30 PM
That is partial Dump, But dont worry all maps are in there.
You just need to know which is which without a driver.

The turbo is not electronically controled, so moding the turbo map wont do absolutely anything. ( thought you might wanna know that)

grinovsky
27th January, 2011, 10:54 PM
That is partial Dump, But dont worry all maps are in there.
You just need to know which is which without a driver.

The turbo is not electronically controled, so moding the turbo map wont do absolutely anything. ( thought you might wanna know that)

oh,that's new for me this information
i far as i know the turbo in 1.5dci have electronic control
:manuflag:

ominimicu
28th January, 2011, 08:24 PM
I though that too. but i doesn not have. dunno what for is the map. look at the turbo of any 1.5dci Clio. or search the internet.

grinovsky
28th January, 2011, 09:46 PM
here is the dump for clio DCI 1.5:
http://www.digital-kaos.co.uk/forums/f175/probleme-29f200bb-175091/

Stanton
30th January, 2011, 12:16 PM
They have a solenoid controled actuator...