View Full Version : Jaguar XJL 2011 need clear file
m3touk85
12th July, 2017, 04:51 PM
HEllo all
i have jaguar XJL 2011 with fault code ( B1003 left hood deployment ) permanent , i change left with right hood actuator same problem
i check left hood socket pinout to airbag control same problem
need clear file please ( i tried many files from forum ) not works
airbag details :
0 285 011 339
DW93 14D374 BD
eeprom 95128
dragon100
12th July, 2017, 05:09 PM
Try and report.
m3touk85
12th July, 2017, 06:41 PM
thanks mate but not works still show Left Hood deployment B1003
any ideas ??
FxShaw
12th July, 2017, 07:50 PM
try and let me know
m3touk85
12th July, 2017, 08:32 PM
FxShaw :
not works \\ pedestrain protection system always on
Dragon100 : same problem but when i clear fault ( pedestrain protection system ) turned off and then come again
FxShaw
12th July, 2017, 11:09 PM
FxShaw :
not works \\ pedestrain protection system always on
Dragon100 : same problem but when i clear fault ( pedestrain protection system ) turned off and then come again
Pedestrian system is different ecu if I am not mistake..not works as in same code for Left Hood deployment B1003????
kristikapa
12th July, 2017, 11:20 PM
Try to connect resistor near ecu. If still not working, airbag module might be hardware faulty
m3touk85
12th July, 2017, 11:28 PM
Its actuator not igniter , if igniter can replaced with resistor
Well
This what's appear , in srs I dreaded faults it went off and come back
This msg related to srs system as shown
https://uploads.tapatalk-cdn.com/20170712/a1d15cea2814402412d067a02a5a31dc.jpghttps://uploads.tapatalk-cdn.com/20170712/1fc51f451e1dd2fa8d53ab04356549f7.jpg
Sent from my iPhone using Tapatalkhttps://uploads.tapatalk-cdn.com/20170712/d9ecb27b66a6b39db7c78b5c456ac104.jpg
FxShaw
12th July, 2017, 11:57 PM
I don't see a airbag light on...I must be missing something..send pic of dtc read out in airbag module
m3touk85
13th July, 2017, 12:49 PM
Error code : B1003. Left hood deployment
Sent from my iPhone using Tapatalk
m3touk85
19th July, 2017, 12:13 AM
Any ideas guys ????
Sent from my iPhone using Tapatalk
Pwack
13th April, 2018, 01:43 PM
This fault can be cleared with Jaguar SDD , theres an option to clear pedestrian system from airbag menu , its a seperate ecu to RCS module the same as the XF.on XF the ecu is located in passenger footwell , not sure about XJ location , i have had both underbonnet airbags go off but i need to clear ECU , i have same message but left and right deployment message , will report back when car comes back from paint
puggy8
31st December, 2020, 05:02 PM
This fault can be cleared with Jaguar SDD , theres an option to clear pedestrian system from airbag menu , its a seperate ecu to RCS module the same as the XF.on XF the ecu is located in passenger footwell , not sure about XJ location , i have had both underbonnet airbags go off but i need to clear ECU , i have same message but left and right deployment message , will report back when car comes back from paint
Hi did you ever managed to clear this fault? I have the same problem.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.