PDA

View Full Version : Can someone please disable torque monitoring in this IBIZA EDC17 File?



morgano
17th July, 2017, 07:37 PM
Hello.

As requested, here file.

icezero2010
18th July, 2017, 10:43 AM
this ecu has no trq monitoring :-)

i think u get not more than 270-280 nm or whats the problem

morgano
18th July, 2017, 11:18 AM
I have not tuned the ecu, but i have seen logs of a tune made from a friend and suspected about trq intervention, that is why i asked.

But if this one does not have torque monitoring then he should look for the "issue" elsewhere.

He tried to achieve 315nm but logs show poor boost (2009 mbar) and around 45mgr max. What matches your guess, around 270-280nm ;)

There is 336nm single for torque intervention i think 0x406DE but for the goal he wanted should not affect.

Thanks ;)

icezero2010
18th July, 2017, 11:27 AM
check adress 444c6 this is for ebene 1 and the solution to get power

your adress is only AccMon_trqMaxEng_C

not relevant