PDA

View Full Version : BMW x5 3.0D idlle speed up need help



marmaro
17th July, 2017, 07:47 PM
HI to all.
I need some help, and I hope someone specializing in BMW will help.
I have in garge BMW x5 2002 3.0D AT with DD4 ecu
SW: 1037351761
and on hot engine somtime engine oil blink on dash.
When start engine speed go to 850 and after 10 s falls to 670.
Engine is after oil pomp change and complete repairs .
If someone can pull up idlle speed to 750-800 it will be great.
Thanks for any help.[
ATTACH]463920[/ATTACH]

marmaro
17th July, 2017, 07:51 PM
I dont now why I cant upload new file.
If someone can help I will send dump on mail.

gmb45
17th July, 2017, 08:04 PM
use the basic uploader same place as the normal uploader hard to miss tho

mihaiservice
17th July, 2017, 09:07 PM
That engine will not have a long life if oil lamp still are blinking,you have to check again the timing and oil pressure with a gauges!
Are a simple and good engine,all you to do are to remove all 6 injectors and use one long screwdriver !

waldi1979
17th July, 2017, 09:18 PM
Now there should be 800.

ollync
17th July, 2017, 10:30 PM
Idle speed up is definitely no solution for your problem. Check , like was said, oil pressure with gauge . When warm at idle it should min 7 PSI that is approx 0.5 bar . If it is so, replace oil pressure sender. If not, check oil pump, bearings, etc that is related to oil pressure. Only if you want that your engine will live a long life.


Sent from my iPhone using Tapatalk

marmaro
18th July, 2017, 06:17 AM
Thanks .I will try and raport.

marmaro
18th July, 2017, 12:43 PM
Idle speed up is definitely no solution for your problem. Check , like was said, oil pressure with gauge . When warm at idle it should min 7 PSI that is approx 0.5 bar . If it is so, replace oil pressure sender. If not, check oil pump, bearings, etc that is related to oil pressure. Only if you want that your engine will live a long life.


Sent from my iPhone using Tapatalk
Thanks for reply.
In this engine it should be 750rpm +-100 on idle.
Here is -100, and I think pull up to 750 it should not be problem,and It can temporarily prevent engine damage (http://www.digital-kaos.co.uk/forums/member.php/222064-waldi1979).
Thanks to
waldi1979 help me and increase speed to 800 rpm on P (automatic transmition) but when set to D speed fall down to 670

(http://www.digital-kaos.co.uk/forums/member.php/222064-waldi1979)



Maybe someone have solution to me , or when member waldi1979 be online can help me .
BR

icezero2010
18th July, 2017, 01:55 PM
test and report rpm 800

marmaro
18th July, 2017, 05:18 PM
test and report rpm 800
Thanks for trying help.
Same situation like with waldi1979 file . On P 800RPM on D fall down to 670.

waldi1979
18th July, 2017, 07:13 PM
Try this file.,

icezero2010
19th July, 2017, 02:28 AM
Thanks for trying help.
Same situation like with waldi1979 file . On P 800RPM on D fall down to 670.
v2 :-D test again

marmaro
19th July, 2017, 07:31 AM
Try this file.,

on P and N 800RPM on D and R 670

marmaro
19th July, 2017, 07:35 AM
v2 :-D test again
Please check archive , somthing wrong with pass.

marmaro
19th July, 2017, 09:21 AM
v2 :-D test again
HI
I've try your second file.
870 RPM on P R N and D:tears_of_joy: if you can stabil it to 800 it will be great , if not It's a great success anyway.
icezero2010 is PRO in WinOLS:cheers::cheers:

icezero2010
19th July, 2017, 12:36 PM
HI
I've try your second file.
870 RPM on P R N and D:tears_of_joy: if you can stabil it to 800 it will be great , if not It's a great success anyway.
icezero2010 is PRO in WinOLS:cheers::cheers:

is air conditioner on??
i have set to 800 not 870 than its anywhere a delta in file

marmaro
19th July, 2017, 03:33 PM
is air conditioner on??
i have set to 800 not 870 than its anywhere a delta in file

With and without aircondition the same sytuation 870RPm