PDA

View Full Version : Sprinter 906 dpf and egr off



dimitar
18th July, 2017, 09:00 AM
Hey guys need dpf and egr off

Edc16+

Thanks in advance

stanislav georgiev
18th July, 2017, 10:34 AM
Try this solution

dimitar
19th July, 2017, 10:29 AM
Still having problems with egr

P2011 and limp mode

Can someone help with egr off please

Autotecno2006
19th July, 2017, 10:48 AM
Here You Go Report Ok

If I Have Helped You Then Hit The Buttons Ok (Thanks & REP )


Regards P

nikka
19th July, 2017, 11:14 AM
Disconect two temperatur sensors pressure sensor and egr
pass pm

dimitar
19th July, 2017, 12:13 PM
Im currently driving with autotecno file

I will report

dimitar
19th July, 2017, 06:20 PM
Autotecno2006 your dump works ok

Nikka i havent time to test your file thanks anyway

Thank you both

dimitar
20th July, 2017, 10:22 AM
Guys van returned today

Same problem with both files

Autotecno dump have limp mode but no mil

Nikka file has limp mode and p2011 fault Airmas drift sensitivity to high

I still need help

stanislav georgiev
20th July, 2017, 10:34 AM
This sprint is quite sensitive. Have you removed the EGR and shut it down mechanically. The file I gave you worked with me with all the plug removed. I additionally closed the EGR mechanically

dimitar
20th July, 2017, 10:52 AM
I have now checked eobd fault

P0101

I have disconected egr and dpf sensors

I will now try to close the egr with plate

stanislav georgiev
20th July, 2017, 11:17 AM
In this model, error codes related to the flowmeter can not be erased . Adaptation data on the flowmeter must be canceled

dimitar
20th July, 2017, 11:26 AM
What do you mean

How to do that

I have launch

Should i better put file with egr on because the egr is ok in working order

stanislav georgiev
20th July, 2017, 11:46 AM
I do not know a friend, I see the Mercedes-Benz with an old diagnosis

stanislav georgiev
20th July, 2017, 11:59 AM
Here is only DPF disabled. The same password

nikka
20th July, 2017, 01:30 PM
Mate STANISLAV mean that need make adaption with start diagnose to air mass sensor .Farst need to open and check if it's EGR blocked open next need to make adaption with star diagnose to air mass sensor.

dimitar
20th July, 2017, 02:32 PM
I have reseted airmass and air filter with launch and wurth
Same problem

Pyromaniak
20th July, 2017, 02:41 PM
Bad airmass ? or need to change values for idle flow in ecu. Stanislav ist best :)

dimitar
20th July, 2017, 02:42 PM
I have reseted airflow sensor and air filter adaptations
With launch and wurth
I have the same problem

dimitar
20th July, 2017, 02:44 PM
What do you suggest

To write file from Stanislav without dpf and egr.. I did that already

I also reseted adaptations

Egr is not blocked the van has great power

Problem arises when you drive on a highway with partial load

nikka
20th July, 2017, 03:15 PM
Hi.This is not too dificult car to do dpf or egr off maibe U have another problem.I don't know that launch or wurth can do adaption of air mass sensor.every time I do this with star diagnose.But I had same problem with sprinter and find broken turbo charger .

Autotecno2006
20th July, 2017, 03:33 PM
Hi, nikka is correct Something is wrong with your air Flow, Is the valve on your egr closed Fully, Is your intercooler blocked & check if your turbo gate is gone stiff !

Regards P

dimitar
20th July, 2017, 03:41 PM
Wastegate working great on both turbines

Boost goes up to 2 bar and regulating great

The van drives throuout the city without a problem

As soon as you get highway driving at part load...the problem arises

dimitar
20th July, 2017, 03:43 PM
I started making tests on egr it turns out that specified and actual airflow differs a lot

I think this is the main problem

Actual airflow is always from 500mg to 1200..

Pyromaniak
20th July, 2017, 03:46 PM
have this car swirl? maybe is problem here

dimitar
20th July, 2017, 05:50 PM
Mercedes fault code 2011 airflow differce too much from actual airflow

Eobd fault code p0101 airflow problem too less....to much

Tested at least 10 files all of them have the same problem

dimitar
20th July, 2017, 09:48 PM
However this is the last time im working with mercedes

Gavra
20th July, 2017, 10:05 PM
If you want to fix Mercedes with Launch and wurth i would recommend to never do it again ;) You need proper tools for them chinese scrap is not good enough .....

stanislav georgiev
21st July, 2017, 05:43 AM
colleague do not give up:peaceful:. Mercedes Benz is my favorite car for work. Why do not you change the flowmeter to see what's happening and there's a change. Also look for a hole in hoses and joints

dimitar
21st July, 2017, 06:52 AM
Hoses and intercooler checked all ok

BTW im more into BMW

Pyromaniak
21st July, 2017, 08:24 AM
Hoses and intercooler checked all ok

BTW im more into BMW

So, remain try airflow meter. Good luck.

dimitar
21st July, 2017, 09:33 AM
reseted all adaptations with star das

same sh1t