EDC17CP44 vag, EGR OFF.

[morgano]

Hi.

Possible egr off this file? Have no damos for it. Thanks in advance.

Regards,

[icezero2010]

only egr is not good on this ecu :-) no more regeneration for dpf

0x399aa0 check this area for delete egr

[pike]

Hi.
Car with start-stop?

[mario38]

Hi.

Possible egr off this file? Have no damos for it. Thanks in advance.

Regards,

You can try disconnecting the egr plug and remove dtc .. did you do this test?

[morgano]

Hi.
Car with start-stop?

Really don't know, but i think yes.

@icezero2010

Thanks, the car will have dpf deleted too, already know switches location ;)

Will look around that address, thanks.

@mario38

No ,have not tested disconnecting plug and delete dtcs, all is working so i prefer going the hysteresis or temp related approach. Thanks.

[icezero2010]

Really don't know, but i think yes.

@icezero2010

Thanks, the car will have dpf deleted too, already know switches location ;)

Will look around that address, thanks.

@mario38

No ,have not tested disconnecting plug and delete dtcs, all is working so i prefer going the hysteresis or temp related approach. Thanks.

without damos tun the car is not easy if you not found the single trq points

the shifting operation is bad

egt very high if u set factor to 1 from egt protection

the egt goes over 1000 degree

with good tuning you can get 350 hp 750nm without problems :-)

[pike]

What errors on the EGR valve now? At the beginning of the topic original file?

[teamtuner]

for dpf off you can give a try

[morgano]

What errors on the EGR valve now? At the beginning of the topic original file?

No errors mate, all is working fine with original, just need close egr not unplug.

First post file is original yes. ;)

Thanks

[morgano]

for dpf off you can give a try

Thanks, i already had located the switches to delete dpf ;)

Car will be at a friend's workshop, just preparing myself in case he asks me for help.

Maybe in a couple of days car goes in and i want to be ready should he needs help. ;)

[icezero2010]

Thanks, i already had located the switches to delete dpf ;)

Car will be at a friend's workshop, just preparing myself in case he asks me for help.

Maybe in a couple of days car goes in and i want to be ready should he needs help. ;)

than use the adress what i say in my first post this is hysterese :-) 3428f7 to 342904 all egr dtc

[pike]

only egr is not good on this ecu :-) no more regeneration for dpf

0x399aa0 check this area for delete egr

It volta and other..., the hysteresis is at a different address.

[icezero2010]

It volta and other..., the hysteresis is at a different address.

My hysteresis is correct:)


Gesendet von iPhone mit Tapatalk

[pike]

Hi.

Possible egr off this file? Have no damos for it. Thanks in advance.

Regards,

You found a solution?

[morgano]

You found a solution?

Finally my friend haven't asked me for help, i had a look at the file and possibly there are more hysteresys maps before the one pointed by icezero2010, but i am not sure because i could not test anything. Thanks for worrying.

Anyway if you have correct solution feel free to post it, it would be fine to have a 100% working solution for this in my knowledge base ;)

Regards,

[pike]

...
Anyway if you have correct solution feel free to post it, it would be fine to have a 100% working solution for this in my knowledge base ;)

Regards,

Unfortunately, my friend, I do not have a tested solution.

[mariusica_boy]

Here, tested solution and working for me with connector egr disconnected!!!
Free, without pass.

[icezero2010]

all what you need i post it :-) set the one hyst. to zero and the dtc all is good :-)