PDA

View Full Version : BMW 118D 163HP Stage 1



huskypt
21st July, 2017, 12:56 PM
Anybody Stage1 on this file:

BMW E87 120D 163HP 2006
Type: EDC16C35
Hardware-ID: 281013251
Software-ID: 389882

Thank you

Ignasvw
21st July, 2017, 03:01 PM
here is your file( USE stage1ok) because in stage1_e87 i missed one torque limiter, second file is all ok),try and report. Thanks button and rep would be great, pass in pm

Gabrielradu09
30th October, 2020, 07:49 PM
Hello guys, may i ask if modified map e87 2006 120d 163hp will work with all e87 same year/engine/hp ? Or modified file should individual on every car with individual original file, and doesn t matter if it s same year/engine/ hp? Thank you very much!

PS: what's the diffrence between reworked version of kessv2 and simple clone without rework?

Tawe
30th October, 2020, 10:30 PM
Hello guys, may i ask if modified map e87 2006 120d 163hp will work with all e87 same year/engine/hp ? Or modified file should individual on every car with individual original file, and doesn t matter if it s same year/engine/ hp? Thank you very much!

PS: what's the diffrence between reworked version of kessv2 and simple clone without rework?
One version of ECU HW, can have many different versions of SW. And especially at BMWs, same version of HW and SW, can have also many differences, so answer is NO. You'll need to read original file and modify it.

Gabrielradu09
31st October, 2020, 12:01 AM
One version of ECU HW, can have many different versions of SW. And especially at BMWs, same version of HW and SW, can have also many differences, so answer is NO. You'll need to read original file and modify it.

Understand, thank you! And about reworked kessv2 what do you think? Should i pay for a reworked clone, or it is not a big difference between normal clone and reworked clone?

Tawe
31st October, 2020, 12:12 AM
Understand, thank you! And about reworked kessv2 what do you think? Should i pay for a reworked clone, or it is not a big difference between normal clone and reworked clone?
As i know, price between aliexpress Kess, and reworked one is not that big. If you brick only one ECU because of non reworked, its not worth the nerves :) BTW, for EDC16 should work, just have stable voltage while writing.

Also, if you need tune for this car, I can make you. Regards!

Gabrielradu09
31st October, 2020, 12:19 AM
As i know, price between aliexpress Kess, and reworked one is not that big. If you brick only one ECU because of non reworked, its not worth the nerves :) BTW, for EDC16 should work, just have stable voltage while writing.

Also, if you need tune for this car, I can make you. Regards!

Perfect! I m going to buy reworked version, don t care about double price, i want the good one. I will text back here in 4-6 days cause of weekend, after i buy it and read my original map, and ill post it here. If it s possible dpf off and stage 1 will be perfect. Thanks alot!

Tawe
31st October, 2020, 12:22 AM
Perfect! I m going to buy reworked version, don t care about double price, i want the good one. I will text back here in 4-6 days cause of weekend, after i buy it and read my original map, and ill post it here. If it s possible dpf off and stage 1 will be perfect. Thanks alot!
Of course it's possible :)

Gabrielradu09
31st October, 2020, 12:30 AM
Of course it's possible :)

Good, do u know about what horse power will be after stage 1, and NM couple? (Safe one) Standard is 163hp 340nm if i remember good ��

Tawe
31st October, 2020, 12:39 AM
Good, do u know about what horse power will be after stage 1, and NM couple? (Safe one) Standard is 163hp 340nm if i remember good ��
Possible 195hp-410nm, or with DPF/EGR removed, additionally 5hp.

chrisimerk
31st October, 2020, 02:12 AM
Good, do u know about what horse power will be after stage 1, and NM couple? (Safe one) Standard is 163hp 340nm if i remember good ��

I have tested stage 1 tune for this model and engine of BMW made 212bhp and 480nm on dyno

Gabrielradu09
31st October, 2020, 11:04 AM
I have tested stage 1 tune for this model and engine of BMW made 212bhp and 480nm on dyno

I also need DPF off, but it s not too much 212hp and 480nm? I don t know nothing about clutch and flywheel, they r not new ^_^

chrisimerk
31st October, 2020, 11:19 AM
I also need DPF off, but it s not too much 212hp and 480nm? I don t know nothing about clutch and flywheel, they r not new ^_^

No there safe figures my tunes tested many times without problems

Gabrielradu09
31st October, 2020, 11:40 AM
No there safe figures my tunes tested many times without problems

Well, i will have on Tuesday-Wednesday my original file, can try ur map aswell, if u can make it with dpf off too. Thank you!