Immo Off Audi A6 V6 2.5 tdi 0281011387 - 8E0907401J

[sebdetours]

Hello

I need to make Immo Off for this Audi A6 V6 2.5 tdi, 0281011387 8E0907401J

I know i need to make EEprom 24c04 and Flash 29F800, and lupu-sandu is the best for this ECU.

I hope someone can help me.

here is the files:

Thanks for your help, Regards

[sebdetours]

hello

i still looking for a immo off on this car. Maybe lupu sandu can help or someone else.

regards

[brend]

hello

i still looking for a immo off on this car. Maybe lupu sandu can help or someone else.

regards

Here you immo off.






:wink:
If help push reputation button.

[Pyromaniak]

WAUZZZ4BZ1N101343
AUZ7Z0Y1718617
281090.09

immo off :peaceful:

[baltazar3]

Hello

I need to make Immo Off for this Audi A6 V6 2.5 tdi, 0281011387 8E0907401J

I know i need to make EEprom 24c04 and Flash 29F800, and lupu-sandu is the best for this ECU.

I hope someone can help me.

here is the files:

Thanks for your help, Regards
Here is...tested....write both files....pm

[sebdetours]

Thanks to brend and pyromaniak, but on this ECU we need to make flash and eeprom.

Thanks a lot baltazar for the files. I wrote to the ECU, i will go to the car this week end. Will back for reply next week.

regards

[sebdetours]

Hello

We try your file baltazar and the car still not start. I have no idea what's happen.

To resume the situation:
Customer changed VP44 pump.

We try to make immo off on original ECU (24c04 +29f800), The car don't start.

i also have the ecu sold with the pump, i made immo off, on this one and the car start but it's manual transmission, and the Flash is not same size (29f400 vs 29f800 in original one).

Is there a solution to change manual from automatic transmission in this ecu?

or maybee adapt code pin in the pump, if i post the 24c04 file from original and new ecu someone can help.

thanks

[brend]

Hello

We try your file baltazar and the car still not start. I have no idea what's happen.

To resume the situation:
Customer changed VP44 pump.

We try to make immo off on original ECU (24c04 +29f800), The car don't start.

i also have the ecu sold with the pump, i made immo off, on this one and the car start but it's manual transmission, and the Flash is not same size (29f400 vs 29f800 in original one).

Is there a solution to change manual from automatic transmission in this ecu?

or maybee adapt code pin in the pump, if i post the 24c04 file from original and new ecu someone can help.

thanks


Mate ,you need just vp44 autorization thats all.
Use vcds thats all or vas5054. From your damp pin is 1251
use vcds go ecu ,enter login 01251 ,use adaptotion chanel 50 put 02151 then test and save thats all and start car.

[brend]

Mate ,you need just vp44 autorization thats all.
Use vcds thats all or vas5054. From your damp pin is 1251
use vcds go ecu ,enter login 01251 ,use adaptotion chanel 50 put 02151 then test and save thats all and start car.

Ups my mistake,not 02151 good 01251.

................use adaptotion chanel 50 put,,, 01251,,, then test and save thats all and.

[sebdetours]

thanks brend and can you also give me the pin number from other ecu.

here is 24c04 file

[brend]

thanks brend and can you also give me the pin number from other ecu.

here is 24c04 file


Here you go..... 1144

[sebdetours]

thanks brend i will try that.

[ixco]

[QUOTE = baltazar3; 3097864] İşte ... test edildi .... iki dosyayı da yaz .... pm [/ QUOTE]
rar pass verirmisiniz