PDA

View Full Version : Mercedes Vito W638 EDC15c5 egr problem



Flasher
27th July, 2017, 07:48 AM
I need to disable the EGR in a file and not really know how.
Maybe someone will help me

File downloaded by galletto via obd

The patient is Mecedes VITO 2.2 CDI W638 2003

flashtech
27th July, 2017, 04:19 PM
Try this.
Password in PM.

Flasher
27th July, 2017, 05:59 PM
Thanks, I'll check and let you know

Flasher
27th July, 2017, 07:16 PM
Does not work, does not spin the starter.
I have nothing to do checksums ... maybe there is a problem here

Ignasvw
27th July, 2017, 07:50 PM
send me that file pass
. i can correct checksum

maajkii
27th July, 2017, 09:19 PM
Does not work, does not spin the starter.
I have nothing to do checksums ... maybe there is a problem here

here's your file, egr off + chks ok.

flashtech
27th July, 2017, 11:25 PM
CS is problem in this case. Solution is very simple with edc15. So if majkii solution will not work send me pm and i will make cs.

maajkii
27th July, 2017, 11:45 PM
CS is problem in this case. Solution is very simple with edc15. So if majkii solution will not work send me pm and i will make cs.

i think it should work :) i know too solution is rly simple :P
best regards flashtech! :)

flashtech
28th July, 2017, 06:13 AM
i think it should work :) i know too solution is rly simple :P
best regards flashtech! :)
Best Regards! ;)

Flasher
28th July, 2017, 10:32 AM
Thank you all for your interest.
EGR disabled and still has a different modification.

Maajkii - in this ecu can not be turned off only switch, maybe in EDC15C6 would be good but thanks anyway :)

maajkii
28th July, 2017, 12:06 PM
Flasher - for me switch with this ecu works... maybe your egr is cluged?

Flasher
30th July, 2017, 09:08 PM
No, it is disconnected
Everything works ... I did not add that it is a V-class
The file was developed by a friend and everything works regardless of whether the plug is connected or not.

Fec001
4th March, 2021, 10:37 AM
Can someone help to switch off EGR completely in this file. Car originally not have EGR and MAF, only MAP.
"New" ECU is from engine what has EGR and MAF. Mechanic wired Maf sensor and built in, now that's ok only EGR fault P1403 remains and limp mode.
It's the same EDC15C5 Vito 112CDi.
I tried to find switch with some 8 bit sequence but nothing.

Junkyard Dog
4th March, 2021, 11:25 AM
Can someone help to switch off EGR completely in this file. Car originally not have EGR and MAF, only MAP.
"New" ECU is from engine what has EGR and MAF. Mechanic wired Maf sensor and built in, now that's ok only EGR fault P1403 remains and limp mode.
It's the same EDC15C5 Vito 112CDi.
I tried to find switch with some 8 bit sequence but nothing.


look 79D38