ravtko
1st August, 2017, 06:42 AM
Hello,
I have P0405 in Mondeo 2.0 tdci duratorque engine equipped with electronic EGR valve (6-pin connector+pressure sensor).
PCM shows that EGR feedback signal is 0,0V but using multimeter I've found there is no such low signal at the EGR output.
Is there someone who could share a wiring diagram of EGR-ECU connection?
Regards!
I have P0405 in Mondeo 2.0 tdci duratorque engine equipped with electronic EGR valve (6-pin connector+pressure sensor).
PCM shows that EGR feedback signal is 0,0V but using multimeter I've found there is no such low signal at the EGR output.
Is there someone who could share a wiring diagram of EGR-ECU connection?
Regards!