PDA

View Full Version : Renault kangoo Immo Off



aeroyas
16th October, 2009, 09:06 PM
Hi freinds, please i need immo off for a renault kangoo, year 2003 diesel, with ecu Lucas DCU3R, i have try with immo killer but dont work, anyone here can help me please, i dont want to pull off the eeprom 95080, i joined the file here, thank's all

youssefi201
16th October, 2009, 11:37 PM
try this files dont forget cut pin 20 immo line ecu

aeroyas
17th October, 2009, 12:13 PM
ahlan houya youssefi, i have try the file and cut the pin 20, the car start only for the first time, but after dont work , thank's khouya, i put off the eeprom, dont have another choice

kool_mi
17th October, 2009, 01:25 PM
you have kango dti 1.5

aeroyas
17th October, 2009, 05:19 PM
hello, no i have an 1.9 dti, do you have a solution please?

PETAR
17th October, 2009, 08:14 PM
YOU MUST USE IMO KILER END RENO EMULATOR FOR THIS COMP

jokersat
18th October, 2009, 06:59 PM
remove this chut 25080 or 95080 and all is ok no immo

tested and ok 100/100

@+

aeroyas
19th October, 2009, 12:16 AM
hello, i did it, i remove the eeprom but as you know, when we do this the car stop hotting at start "le prechauffage ne marche plus"

jokersat
19th October, 2009, 12:16 PM
ok i try to clear immo original dump

you van try this :manuscarf:

djdansmart
19th October, 2009, 07:47 PM
Try this!! Good luck!

ecu
20th October, 2009, 10:23 AM
must use emulator

olecram
20th October, 2009, 01:47 PM
hi everybody, i?ve got the solution for this ECU. Only need to burn a pic, make a small circuit and reprog the 95080. If anyone want to try it here it is. If you have any experience with pics this will be really easy, otherwhise ask and i?ll post the wiring schematics

djdansmart
20th October, 2009, 05:46 PM
hi everybody, i?ve got the solution for this ECU. Only need to burn a pic, make a small circuit and reprog the 95080. If anyone want to try it here it is. If you have any experience with pics this will be really easy, otherwhise ask and i?ll post the wiring schematics


So post..schematic..msybe other needs this kind of help!

ricards99
21st October, 2009, 07:25 PM
i need schematics please
thx

aeroyas
23rd October, 2009, 05:00 PM
hello, thank's all for answering, please we need shematic for Olecram solution, thank's and good luck for all

vevepatronu
27th February, 2010, 12:32 AM
too late maybe... i just saw this post, the solution of olecram si the best and easy... you need an emulator based on pic 16f84(you can found it here on DK), i tell you is the best because you know the pin that the emulator generates...., all you have to do is to make the ecu virgin or to burn the dump into the chip because it has the same code that the emulator sends to ecu.... (this kind of emulator i was interested to make.... i need to learn some more things to make my own schematic :P)

mihai_vyt
5th March, 2010, 04:45 PM
please help me with a dump for immo off

ruleczka
25th June, 2010, 08:13 AM
95080 to clear the FF 00 to 0D and 80 to 8D + emulator the pin 20.

rsmtechnicians
25th June, 2010, 09:05 PM
hi how did you pull the file off the ecu/immo box what did you use?

Angel_113
20th July, 2010, 06:29 AM
Hi all,
I'm having exactely the same problem, did we managed to solve it .. can you please share the solution.
cheers

Lexas
29th July, 2010, 11:58 PM
Hello, is it posible to bypass DCU3R immo on renault cango without any programator?
Thanks

jruibarroso
30th September, 2010, 09:52 AM
can you post schematics for emulator , please

or simply , what Xtal to use and output pin

thank you

treo
30th September, 2010, 01:12 PM
Hi
2 weeks ago I use this file and it works.

tomaszcz
30th September, 2010, 08:01 PM
Hi
2 weeks ago I use this file and it works.

There is another patent on a this ECU .No need Emu. Work fine 100%

calin_bm
3rd October, 2010, 04:36 PM
ok,but what tool did you use for this?

bricolo
3rd October, 2010, 05:27 PM
There is another patent on a this ECU .No need Emu. Work fine 100%

Hi
UPA can write status, do you know if it is OK ?
and what is code status for write disable ?
thank in advance

elecautocr
7th October, 2010, 09:57 PM
There is another patent on a this ECU .No need Emu. Work fine 100%


Do I need to fill eeprom with 00H and write/protect status ON ??

tomaszcz
8th October, 2010, 08:32 AM
Do I need to fill eeprom with 00H and write/protect status ON ??

Do not need to fill in, just to save the write protect. I use Orange programmer.
Original chip from your ecu is not write protect!
You have to change the chip to the new. 25c080 and save write protect.
Work fine 100%.

elecautocr
8th October, 2010, 03:37 PM
Do not need to fill in, just to save the write protect. I use Orange programmer.
Original chip from your ecu is not write protect!
You have to change the chip to the new. 25c080 and save write protect.
Work fine 100%.


But, Which file do I need to put in the 25C080 for immo off ??

bricolo
8th October, 2010, 03:58 PM
Hi
in immokiller, they are 2 solutions : clear and off
what do you use, clear or off ?
with emulator i use clear ,but it is with emulator
thank in advance for this good info

tomaszcz
11th October, 2010, 10:53 AM
But, Which file do I need to put in the 25C080 for immo off ??

Send your dump

bricolo
11th October, 2010, 11:49 AM
Hi
here is my file immo on, can you make it off ?
thank in advance

elecautocr
11th October, 2010, 03:52 PM
Send your dump

Hi Tomas:

here is the dump, thanks !!

tomaszcz
11th October, 2010, 04:34 PM
Hi
here is my file immo on, can you make it off ?
thank in advance

This dump is bad.

tomaszcz
11th October, 2010, 04:36 PM
Hi Tomas:

here is the dump, thanks !!

This dump im*o off. Save all write protect and send report.

easytech
14th October, 2010, 08:37 PM
In case the programmer doesn't support write protect just
lift pin3 or cut pcb track under 25080 and connect pin 3 to pin4 gnd.

bricolo
15th October, 2010, 06:05 AM
In case the programmer doesn't support write protect just
lift pin3 or cut pcb track under 25080 and connect pin 3 to pin4 gnd.

Hi, thank for this but i dont understand
in pcb pin 3 is already connect on pin 4 and with pin 7

i'v try too to connect pin 3 on vcc : dont work
i'v try to lift pin 3 dont work
so i put emulator and work perfect

easytech
15th October, 2010, 12:57 PM
I think you count from the wrong side of the chip unless there are more different PCB types from this ecu.
Pin 1 is located near the cpu. I have done a Clio and a Kangoo this week, with this option and works fine.
In the datasheet for the 25080 you find pin 3 is write protection.

bricolo
17th October, 2010, 09:54 AM
Hi
I report my work on this ecu
i made immo off with immo killer and before programming
i select on my see prog programmer : write status register / protection setting All
And with this WORK FINE, ecu does'nt write eeprom
So big thank to Tomaszcz

elecautocr
18th October, 2010, 02:53 PM
This dump im*o off. Save all write protect and send report.

Hello:

Thanks tomas, it works !!!!

trigital
19th October, 2010, 01:32 PM
With this write protect solution is still need to cut the pin 20?

Thanks,

tomaszcz
19th October, 2010, 01:34 PM
With this write protect solution is still need to cut the pin 20?

Thanks,

Yes,cut pin 20 immo line ecu.

trigital
22nd October, 2010, 11:22 AM
Pin 20 from ECU or immo plug?

Thanks!

carsolution
27th October, 2010, 02:34 AM
You just need hotting at start in very cold countries.
If you are in a country with moderate weather you do not need it.
I am from Portugal and have a Mercedes C220, the plugs box is dead since 3 years ago, the car starts well everyday and never had problems.
Regards,
Nuno

radu_stoica78
31st October, 2010, 08:39 AM
Hello everyone. I want to do Immo off a renault kangoo in 2001. Sagem immobilizer is a piu 21655452 - 7b eeprom 93c46. Can anyone help me?

lupu_sandu
5th December, 2010, 10:45 PM
Wrong post...

the_knok
6th December, 2010, 01:55 PM
Hi freinds, please i need immo off for a renault kangoo, year 2003 diesel, with ecu Lucas DCU3R, i have try with immo killer but dont work, anyone here can help me please, i dont want to pull off the eeprom 95080, i joined the file here, thank's all

Here you go

Test and post results

Regards...

alfainyeccion
10th September, 2011, 10:40 AM
hello friends I'm in trouble with immo in serious kangoo kindly pass me the pass, thanks in advance

karanja
17th October, 2011, 04:09 PM
hi guys

i have renault kangoo f 1.9 diesel engine i finish to program the key using gambit
the car is no starting is starting after 1 sec goes off but the sec light is going off after switching ignition on

the computer is in engine compartment is DCU3R HOM 7700115802

OR R04010034B made in UK the eeprom is 25080 you will find the dump attached

please i need the help




best regards

karanja
19th October, 2011, 10:34 AM
hi guys

i have renault kangoo f 1.9 diesel engine i finish to program the key using gambit
the car is no starting is starting after 1 sec goes off but the sec light is going off after switching ignition on

the computer is in engine compartment is DCU3R HOM 7700115802

OR R04010034B made in UK the eeprom is 25080 you will find the dump attached

please i need the help




best regards
Attached Files
kangoo atecar ecu immo 25080.rar (440 Bytes, 1 views)

karanja
19th October, 2011, 10:35 AM
hi guys

i have renault kangoo f 1.9 diesel engine i finish to program the key using gambit
the car is no starting is starting after 1 sec goes off but the sec light is going off after switching ignition on

the computer is in engine compartment is DCU3R HOM 7700115802

OR R04010034B made in UK the eeprom is 25080 you will find the dump attached

please i need the help

alfabit
19th October, 2011, 11:02 AM
hi guys

i have renault kangoo f 1.9 diesel engine i finish to program the key using gambit
the car is no starting is starting after 1 sec goes off but the sec light is going off after switching ignition on

the computer is in engine compartment is DCU3R HOM 7700115802

OR R04010034B made in UK the eeprom is 25080 you will find the dump attached

please i need the help

I do that by virgin 25080 ( cutting case, bleah ! ) cut wire 20 and put an EMU. Doesn`t work well with no flash. You can`t get rid of that EMU. Immo killer doesn`t work on all DCU3R ( only early models, newer no, tryed myself )
And write protecting 25080 is a lotto !
It`s up to you. I gave you the surest way, worked for me many times.
It`s an hour work. ( excluding making EMU )

karanja
19th October, 2011, 03:36 PM
tell me exacly what i have to do because i dont understand well what you mean by that

what is an EMU


best regards

vladtimmy
20th October, 2011, 07:35 AM
What keys did you make with gambit ? did you use dump from 93c46 to make keys ?
Maybe the dump from the eeprom is corrupted and you make wrong keys, mine works fine, i make keys with gambit aswell and working :)
Befor i tried immo off but i didn't make Write protect the 25080 and the car was starting for one time and after that the car dosen't starts .
Use gambit , make keys and that's all :)

alfabit
20th October, 2011, 01:00 PM
What keys did you make with gambit ? did you use dump from 93c46 to make keys ?
Maybe the dump from the eeprom is corrupted and you make wrong keys, mine works fine, i make keys with gambit aswell and working :)
Befor i tried immo off but i didn't make Write protect the 25080 and the car was starting for one time and after that the car dosen't starts .
Use gambit , make keys and that's all :)

That`s why i say WP for 25080 is a lotto !
You make virgin and use emu. And the car will start everytime it has battery and fuel ! :top:

alfabit
20th October, 2011, 01:24 PM
tell me exacly what i have to do because i dont understand well what you mean by that

what is an EMU


best regards

Send to you your dump virginised ( but how could you read that dump, 25080 = 16k ! :stoned:)
Write the dump i sent, put flash back, cut wire 20, and use EMU ( emulator, it`s doing the same a key is doing, it is learnt by ecu and the engine will start no matter what you use for key, even a screwdriver )
Emu schematics you find here on dk. A good electronic makes you one in a couple hours.
More questions and answers after you do that i told you.

DO NOT START THE CAR WITHOUT EMU, IT WILL START ONLY ONCE, AFTER THAT YOU MUST REPEAT AGAIN THE PROCEDURE VIRGINISING !

karanja
20th October, 2011, 07:08 PM
yes i used 93c46 from sagem immo box on the back of dashboard to make the key with gambit

where can i get Renault EMU ?

best regards

alfabit
21st October, 2011, 10:23 AM
where can i get Renault EMU ?



Thanks to dk friends, this is the schematics of Reno emu ( took from dk, you could do a search...)

Make it yourself or a friend of yours or buy one from ebay ( ~ 50 euros if you have money to throw out )

alfabit
22nd October, 2011, 04:38 PM
Wrong post... Mistook the thread !

arvedo
5th November, 2011, 03:52 PM
hello I have a renault kangoo 1.9 diesel ecu 2004, DCU3R HOM7700115802 as removing Realty

karanja
6th November, 2011, 08:21 AM
hi k members
my renault kangoo does't have pin 20 this procedure for emu and virgin the ecu is it ok to use ?


best regards

karanja
18th November, 2011, 09:50 PM
hi arvedo

tell me i see your ecu look like mine but mine pin 20 is not used

yours is it the same ? how to procedure with cutting pin 20 ?

please help i have got EMU but i find no pin 20 on connector

karanja
19th November, 2011, 03:14 PM
hi everybody

mine is kangoo diesel ecu 2001 DCU3R HOM7700115802 but i found pin 20 0n it no cable (connection )

please help

karanja
21st March, 2012, 05:23 PM
i have kangoo diesel ecu 2001 DCU3R HOM7700115802

i need to immo off this file i have emulator

karanja
21st March, 2012, 05:24 PM
i tried last time with other kangoo but no success after i found injector pump was bad


but thanks for your support all dk members

karanja
23rd March, 2012, 10:13 AM
any help brothers ?

regards

gonzacal
20th April, 2012, 08:59 PM
Hi I'm Gonzalo from Argentina and I wanted thank them for this forum, as I can get the immobilizador

Kanaan
20th April, 2012, 09:07 PM
this car will not work ok without the immo .
it is very easy to fix and keep it as original

gonzacal
21st April, 2012, 04:32 PM
immo solution helps diesel kangoo 1.9 d in 2006 lucas dcu3r

kugglefischer
25th January, 2013, 10:51 AM
Hi
2 weeks ago I use this file and it works.

HELLO
I have a suzuki jimny diesel
lucas dcu3r control unit
reference 8200126607
year 2001
eeprom 25080

if i use a 95080 , instead because the 25080 broke when i tried to remove it....will it be ok?

and will i need to lock the file?
and also cut pin 20 too....
please , tell me what you did to start this?

many :hmmmm2:many thanks.....

K

kugglefischer
25th January, 2013, 10:56 AM
remove this chut 25080 or 95080 and all is ok no immo

tested and ok 100/100

@+

HI
I have the same problem and need immo off solution that works 100%....will this work on this car with this ecu?

suzuki jimny diesel
lucas dcu3r control unit
reference 8200126607
year 2001
eeprom 25080

please give me some help with a reply back...so i can test it!

thanks alot!

K

kugglefischer
10th September, 2013, 12:24 PM
HI
I have the same problem and need immo off solution that works 100%....will this work on this car with this ecu?

suzuki jimny diesel
lucas dcu3r control unit
reference 8200126607
year 2001
eeprom 25080

please give me some help with a reply back...so i can test it!

thanks alot!

K

solved!
removed 25080....
runs everytime....
sorry for late reply......