View Full Version : Transit 2013 SID208 programming
Fec001
5th August, 2017, 08:53 AM
Hi!
Is that possible, the 2.11 Ktag can't read SID208 Ford from year 2013?
It can connect to ECU but can't ID and must select plugin manually (510) but after nothing happen.
Device is EU, works perfect with other ECU like EDC17 BMW, VAG, Opel etc...
wicek
5th August, 2017, 05:12 PM
Give power from lab power supply or aku.
LaraVAG
5th August, 2017, 07:33 PM
Only oryginal tool
bersch8688
6th August, 2017, 08:03 PM
Ktag clone can do it!
https://youtu.be/MNo0LKF7A-M
smirnoff_rules
6th August, 2017, 08:20 PM
power from battery or 14.8v sounds alot but some need it
smirnoff_rules
6th August, 2017, 08:31 PM
power from battery or 14.8v sounds alot but some need it
if you have the same quartz as the picture on the left should work . if reworked with the one on the right it will not
https://i.gyazo.com/9480a4b7e2562914fba99a369dcb7ee6.png
Fec001
7th August, 2017, 07:57 AM
power from battery or 14.8v sounds alot but some need it
if you have the same quartz as the picture on the left should work . if reworked with the one on the right it will not
https://i.gyazo.com/9480a4b7e2562914fba99a369dcb7ee6.png
Will check ktag PCB
Fec001
7th August, 2017, 08:19 AM
Pictures about PCB and Ktag error
SOLVED:
It can read with 14V!!!!!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.