PDA

View Full Version : Focus II 1.6 TDCI - DPF removal



AndyCZ
17th August, 2017, 02:32 PM
Hi guys,
I have focus 2 with bad DPF removed, there are 4 DTS that cannot be removed permanetly.

Could you please swap it out from SW?

P2584
P2585
P1922
P1928

Fec001
17th August, 2017, 02:51 PM
Here is your file, DPF off!!!

Ignasvw
17th August, 2017, 02:52 PM
Disconnect facm module, and dpf liquid if you can. Here your file, dtc off. PRESS THANKS AND REP BUTTONS. PASS PM

AndyCZ
17th August, 2017, 04:25 PM
Thanks guys,
the DPF alredy been removed. I need remove these DTS:

P2584
P2585
P1922
P1928


Has it been done?

Ignasvw
17th August, 2017, 04:33 PM
In my solution yes. abaut fec001 idk

AndyCZ
18th August, 2017, 11:15 AM
In my solution yes. abaut fec001 idk

These DTSs has not been removed:

===FACM DTC P1922-60===
Code: P1922 - Fuel Additive Level Circuit

===FACM DTC P1928-60===
Code: P1928 - Fuel Additive Pump Control Circuit/Open


DTS P1922 is permanent, cannot be cleared.
DTS P1928 appear after engine start.

Any solution?

johak
18th August, 2017, 12:20 PM
Try this one

johak
18th August, 2017, 01:44 PM
This file has been changed
If you test this file please report

AndyCZ
18th August, 2017, 03:02 PM
This file has been changed
If you test this file please report

Thanks. I will.

AndyCZ
19th August, 2017, 12:04 PM
Jonak and Fec001,
your files are same and these DTS not cleared.


These DTSs has not been removed:

===FACM DTC P1922-60===
Code: P1922 - Fuel Additive Level Circuit

===FACM DTC P1928-60===
Code: P1928 - Fuel Additive Pump Control Circuit/Open


DTS P1922 is permanent, cannot be cleared.
DTS P1928 appear after engine start.

Any solution?

johak
19th August, 2017, 12:43 PM
100% identical? This is a manual solution.


Ok, thanks for the reply

carbon7319
19th August, 2017, 01:43 PM
Strange , in this flash DTC 1922 and 1928 does not exist.

AndyCZ
19th August, 2017, 01:56 PM
100% identical? This is a manual solution. Ok, thanks for the reply

Yes, no difference hex editor found.

AndyCZ
19th August, 2017, 01:57 PM
Strange , in this flash DTC 1922 and 1928 does not exist.

Unfortunate, these DTS present.

atayok
19th August, 2017, 02:16 PM
PASS PM
DPF OFF TANK OFF

AndyCZ
20th August, 2017, 03:32 PM
PASS PM
DPF OFF TANK OFF

With this flash car not start. Fortunately recovery worked.

Faraday
20th August, 2017, 03:44 PM
Write ori, clear errors, write mod from ori disconnect additive module clear dtc. If mod ok no DTC



These DTSs has not been removed:

===FACM DTC P1922-60===
Code: P1922 - Fuel Additive Level Circuit

===FACM DTC P1928-60===
Code: P1928 - Fuel Additive Pump Control Circuit/Open


DTS P1922 is permanent, cannot be cleared.
DTS P1928 appear after engine start.

Any solution?

johak
21st August, 2017, 08:20 AM
AndyCZ you sure you downloaded my last file "WinOLS (Ford Focus (dpf dtc) - 374401)" ?

AndyCZ
21st August, 2017, 06:07 PM
AndyCZ you sure you downloaded my last file "WinOLS (Ford Focus (dpf dtc) - 374401)" ?


Yes, these DTSs are present.

AndyCZ
21st August, 2017, 06:08 PM
Write ori, clear errors, write mod from ori disconnect additive module clear dtc. If mod ok no DTC

Did this definetely. No luck.

The car is gone. Thanks all for help. Not solved.

Babos
21st August, 2017, 06:21 PM
I read that post and not want to say anything bad, but all who try to delete(DTS P1922 is permanent, cannot be cleared.
DTS P1928 appear after engine start.) are stupid! and dont understand why :D