Focus II 1.6 TDCI - DPF removal

[AndyCZ]

Hi guys,
I have focus 2 with bad DPF removed, there are 4 DTS that cannot be removed permanetly.

Could you please swap it out from SW?

P2584
P2585
P1922
P1928

[Fec001]

Here is your file, DPF off!!!

[Ignasvw]

Disconnect facm module, and dpf liquid if you can. Here your file, dtc off. PRESS THANKS AND REP BUTTONS. PASS PM

[AndyCZ]

Thanks guys,
the DPF alredy been removed. I need remove these DTS:

P2584
P2585
P1922
P1928


Has it been done?

[Ignasvw]

In my solution yes. abaut fec001 idk

[AndyCZ]

In my solution yes. abaut fec001 idk

These DTSs has not been removed:

===FACM DTC P1922-60===
Code: P1922 - Fuel Additive Level Circuit

===FACM DTC P1928-60===
Code: P1928 - Fuel Additive Pump Control Circuit/Open


DTS P1922 is permanent, cannot be cleared.
DTS P1928 appear after engine start.

Any solution?

[johak]

Try this one

[johak]

This file has been changed
If you test this file please report

[AndyCZ]

This file has been changed
If you test this file please report

Thanks. I will.

[AndyCZ]

Jonak and Fec001,
your files are same and these DTS not cleared.


These DTSs has not been removed:

===FACM DTC P1922-60===
Code: P1922 - Fuel Additive Level Circuit

===FACM DTC P1928-60===
Code: P1928 - Fuel Additive Pump Control Circuit/Open


DTS P1922 is permanent, cannot be cleared.
DTS P1928 appear after engine start.

Any solution?

[johak]

100% identical? This is a manual solution.


Ok, thanks for the reply

[carbon7319]

Strange , in this flash DTC 1922 and 1928 does not exist.

[AndyCZ]

100% identical? This is a manual solution. Ok, thanks for the reply

Yes, no difference hex editor found.

[AndyCZ]

Strange , in this flash DTC 1922 and 1928 does not exist.

Unfortunate, these DTS present.

[atayok]

PASS PM
DPF OFF TANK OFF

[AndyCZ]

PASS PM
DPF OFF TANK OFF

With this flash car not start. Fortunately recovery worked.

[Faraday]

Write ori, clear errors, write mod from ori disconnect additive module clear dtc. If mod ok no DTC



These DTSs has not been removed:

===FACM DTC P1922-60===
Code: P1922 - Fuel Additive Level Circuit

===FACM DTC P1928-60===
Code: P1928 - Fuel Additive Pump Control Circuit/Open


DTS P1922 is permanent, cannot be cleared.
DTS P1928 appear after engine start.

Any solution?

[johak]

AndyCZ you sure you downloaded my last file "WinOLS (Ford Focus (dpf dtc) - 374401)" ?

[AndyCZ]

AndyCZ you sure you downloaded my last file "WinOLS (Ford Focus (dpf dtc) - 374401)" ?


Yes, these DTSs are present.

[AndyCZ]

Write ori, clear errors, write mod from ori disconnect additive module clear dtc. If mod ok no DTC

Did this definetely. No luck.

The car is gone. Thanks all for help. Not solved.

[Babos]

I read that post and not want to say anything bad, but all who try to delete(DTS P1922 is permanent, cannot be cleared.
DTS P1928 appear after engine start.) are stupid! and dont understand why :D

[xaimitu]

I read that post and not want to say anything bad, but all who try to delete(DTS P1922 is permanent, cannot be cleared.
DTS P1928 appear after engine start.) are stupid! and dont understand why :D

I was thinking the exact same thing LOLsies